Precision CNC Machined Drone Gimbal Parts | Custom Tolerance, No MOQ
OpeningYour gimbal design deserves better than a prototype shop. We machine drone gimbal parts directly from your STEP or IGES file. No redrawing, no interpretation guesswork. We verify every critical
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your gimbal design deserves better than a prototype shop. We machine drone gimbal parts directly from your STEP or IGES file. No redrawing, no interpretation guesswork. We verify every critical dimension before the parts leave our floor.
At a glance: ±0.005 mm tolerance on machined features, 3-day lead time for standard aluminum parts, no MOQ, full material certification. Made in China, engineered for global OEMs.
Material certs, dimensional report, RoHS/REACH compliance
Lead time
3-5 days (prototype), 10-15 days (production)
MOQ
No MOQ. One piece is fine.
Three reasons buyers send us their drawings
1. Batch-traceable quality. Every batch gets a unique job number. We track material heat number, machine operator, tooling, and inspection results against that number. If a part fails in the field, we can trace it back to the exact billet and setup. You get a full traceability report with every shipment.
2. Inspection report per batch. We do not ship blind. Each batch goes through a first-article inspection (FAI) and a final inspection. You receive a dimensional report with actual measured values, not just a pass/fail tick. For critical gimbal axes, we include runout and concentricity data. If you need PPAP level 3, we can do that too.
3. One factory for CNC + stamping + springs + heat sinks. Your gimbal assembly is not just machined parts. It has stamped shims, coil springs for damping, and maybe a heat sink for the motor driver. We run all four lines under one roof. No multi-vendor coordination, no shipping delays between suppliers, no tolerance stack-up arguments. You send one drawing package, we deliver a complete sub-assembly.
Where these parts are used
Camera gimbals for drones (3-axis stabilization): Roll, pitch, and yaw arms machined from 7075-T6 for stiffness-to-weight ratio. We hold ±0.01 mm on bearing seats to ensure zero play.
Industrial inspection drones: Payload mounts and sensor brackets requiring vibration damping. We machine spring pockets and threaded inserts for elastomer isolators.
Agricultural spray drones: Gimbal housings exposed to chemicals. We use 6061-T6 with hard anodize (50 µm) for corrosion resistance.
Delivery drones: High-volume gimbal arms where weight is critical. We use CNC machining with thin-wall features down to 0.8 mm wall thickness, then T6 temper.
Racing/FPV drones: Small, complex gimbal parts with M1.6 threads and 0.5 mm slots. Our Swiss-type lathes handle these without burrs.
Q: What is your MOQ?
A: No MOQ. We machine a single prototype for testing or a million pieces for production. Tooling is standard, so there is no setup cost penalty for small batches. Your first order can be one piece.
Q: How do you guarantee tolerance and quality?
A: We use in-process probing on the CNC machines, then verify with a Zeiss CMM. For gimbal parts, we check bore concentricity, surface finish, and thread position. Every batch gets a dimensional report. If a part is out of spec, we scrap it—we do not ship "close enough."
Q: What is your lead time for custom CNC machining?
A: Prototype (1-10 pieces): 3-5 working days. Production (100+ pieces): 10-15 working days. Urgent orders can be expedited to 48 hours for simple aluminum parts. We quote lead time based on your actual geometry, not a generic promise.
Q: Can you provide material certificates and compliance documents?
A: Yes. We supply mill test certificates for all metals, RoHS and REACH declarations, and ISO 9001:2015 quality system documentation. For aerospace or medical gimbal parts, we can provide full traceability from billet to finished part.
Send your drawing
Stop guessing if your gimbal parts will fit. Send us your STEP file, PDF drawing, or even a hand sketch. We will review the geometry, suggest material and tolerance improvements, and give you a firm quote within 12 hours.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Precision manufacturing is not a slogan. It is a process. We verify, measure, and document every part we ship. Your gimbal will perform as designed—or we will not ship it.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.