Precision CNC Machined Robot Gripper Parts – Built to Your Drawing, Verified Before ShipmentYour gripper design is only as good as the parts that execute it. We machine each compon
Precision CNC Machined Robot Gripper Parts Made in China No MOQ
Precision CNC Machined Robot Gripper Parts – Built to Your Drawing, Verified Before ShipmentYour gripper design is only as good as the parts that execute it. We machine each component to your exact pr
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Precision CNC Machined Robot Gripper Parts – Built to Your Drawing, Verified Before Shipment
Your gripper design is only as good as the parts that execute it. We machine each component to your exact print—no reinterpretation, no shortcuts. Every batch is inspected against your GD&T callouts, and we send you the verification report before the parts leave our floor.
Ra 0.4 µm machined; anodizing (clear/black), hard coat, passivation, nickel plating
Batch size
1–100,000+ pieces (no MOQ)
Inspection
CMM (Zeiss), optical comparators, surface profilometer; full dimensional report per batch
Lead time
7 days for prototypes, 12 days for production runs (Dongguan, China)
Certifications
ISO 9001:2015, IATF 16949 (automotive line), material certs (EN 10204 3.1)
Three Reasons Buyers Send Us Their Drawings
1. Batch-traceable quality.
Each batch gets a unique job number. We track raw material heat numbers, tool wear logs, and operator sign-offs. If a part fails in your assembly, we trace it back to the exact machine, tool, and shift. You get full traceability, not just a box of parts.
2. Inspection report per batch – free.
We don’t just sample. We measure critical features on 100% of parts when tolerance is under ±0.01 mm. For standard tolerances, we use AQL 2.5 sampling. You receive a PDF report with CMM points, surface roughness values, and thread gauges results. No extra charge.
3. One factory for CNC + stamping + springs + heat sinks.
Your gripper likely needs more than machined jaws. Maybe a stamped bracket, a compression spring, or a heat sink for the motor driver. We run all four lines under one roof. You get one supplier, one quality system, one shipping point. Fewer emails, fewer delays, lower freight cost.
Where These Parts Are Used
Robot gripper parts from our shop go into real production environments:
Collaborative robot (cobot) end-of-arm tooling – machined aluminum fingers with hard-coated surfaces for pick-and-place of electronics.
Industrial pneumatic grippers – hardened steel jaws and pivot pins that cycle 10 million times without measurable wear.
Electric grippers for cleanroom assembly – PEEK insulators and titanium fingers for semiconductor wafer handling.
Automotive welding lines – custom gripper bodies with integrated coolant channels, machined from 7075-T6 and hard anodized.
Food packaging machines – stainless steel 316L fingers with Ra 0.8 µm finish to meet hygiene standards.
We also machine custom quick-change adapters, sensor mounts, and vacuum cup holders that attach to your gripper system. If it’s in your drawing, we can cut it.
Q: Do you really have no MOQ?
Yes. We run single-piece prototypes for design validation and scale to thousands for production. The unit price drops with quantity, but we don’t penalize you for ordering one part.
Q: How do you guarantee ±0.005 mm tolerance?
We use temperature-controlled machining (20±1°C) and in-process probing. After machining, we verify on a Zeiss CMM with a calibrated probe. If a feature is out of spec, we rework or scrap it—never ship it. The inspection report shows actual measured values.
Q: What is your real lead time for a custom gripper part?
For a standard aluminum part with 2–3 operations, we ship in 7 days. Complex 5-axis parts with tight tolerances take up to 12 days. Urgent orders can be expedited to 72 hours for an additional 20% surcharge.
Q: Can you provide material certificates?
Yes. We supply EN 10204 3.1 material certificates for metals and FDA-grade certificates for plastics. Each batch’s certificate is linked to the job number for full traceability.
Send Your Drawing – Get a Firm Quote in 12 Hours
Stop guessing about cost and lead time. Send us your 2D drawing or 3D STEP file. We’ll review the geometry, tolerances, and surface finish, then return a firm quote with unit price, tooling cost (if any), and delivery date. No hidden fees, no vague estimates.
Precision manufacturing is our only business. Custom CNC machining in Dongguan, China – 20 years, 4 production lines, zero excuses.
Email: sc@bquq.com
WhatsApp: +86 13713157787
We reply within 12 hours, Monday to Saturday. Your drawing is confidential—NDA on request.
