OpeningWe make stainless steel coil compression springs from your drawing. Not from a catalog. You send the file, we cut the wire, grind the ends, and set the load. Every spring is
OpeningWe make stainless steel coil compression springs from your drawing. Not from a catalog. You send the file, we cut the wire, grind the ends, and set the load. Every spring is measured before it
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
We make stainless steel coil compression springs from your drawing. Not from a catalog. You send the file, we cut the wire, grind the ends, and set the load. Every spring is measured before it ships. If it doesn't match your print, you don't pay for it.
At a glance: Tolerance ±0.02 mm on wire diameter, ±0.05 mm on free length. Lead time 7–10 days for prototypes, 15–20 days for production. No MOQ. All springs are made in China at our Dongguan factory, with a full inspection report per batch.
100% dimensional check on critical specs; load test per batch
Certifications
ISO 9001:2015, material certificates per heat number
Three reasons buyers send us their drawings
1. Batch-traceable quality. Each batch gets a unique lot number. We record the wire heat number, machine settings, and operator ID. If a problem appears in your assembly line, we can trace it back to the exact coil and hour of production. You get a full traceability report with every shipment.
2. Inspection report per batch. We do not rely on a single final check. After coiling, we measure free length, outer diameter, and wire diameter on a sample from every batch. Then we load-test 5% of the parts to verify spring rate and solid height. You receive a signed inspection report with actual measured values, not just a pass/fail stamp.
3. One factory for CNC + stamping + spring + heatsink. Your compression spring often sits next to a stamped bracket, a CNC-machined housing, or a heatsink. Instead of coordinating three suppliers, you send us the whole assembly. We make all parts in-house, assemble them, and ship one SKU. This cuts your lead time by 2–3 weeks and removes tolerance stacking between vendors.
Where these parts are used
Custom stainless steel compression springs appear in demanding environments where carbon steel would corrode or fatigue too fast.
Medical devices: Insulin pens, surgical staplers, drug delivery pumps. Springs here need tight load tolerances and biocompatible surfaces.
Automotive: Fuel injectors, valve return springs, brake system components. We use SUS316 or 17-7PH for high temperature and corrosion resistance.
Aerospace: Actuators, landing gear locks, cabin pressure valves. Springs must pass 100% crack detection and hold load after 1 million cycles.
Electronics: Battery contacts, switch mechanisms, connector pins. Small wire diameters down to 0.10 mm with consistent force over thousands of cycles.
Industrial equipment: Safety valves, pressure regulators, clutch mechanisms. Springs often run in oil or steam, so we specify passivated finishes.
Q: Is there really no MOQ?
A: Correct. We run one prototype spring for you if that's what you need. For production, we price per piece based on wire size and complexity. The unit price drops as quantity increases, but you are never forced to order more than your project requires.
Q: How do you guarantee tolerance and quality?
A: We measure every batch with calibrated digital calipers and a load tester. Our tolerance of ±0.02 mm on wire diameter is tighter than the standard DIN 2095 spec. We also send you a sample with the inspection report before full production, so you approve the actual part, not a drawing.
Q: What is the typical lead time?
A: Prototypes ship in 7–10 working days after drawing approval. Production runs take 15–20 working days. If you need faster, we can split your order into partial shipments—first 20% in 5 days, the rest in 10 days.
Q: Can you provide material certificates?
A: Yes. Every spring batch comes with a material certificate from the wire mill, showing the heat number, chemical composition, and mechanical properties. We also provide a RoHS and REACH compliance statement on request.
Send your drawing
Email your PDF, STEP, or DXF file to sc@bquq.com. Include the wire diameter, free length, outer diameter, number of coils, and load requirements if you have them. Our engineers will review the design for manufacturability and send you a firm quote within 12 hours. For urgent projects, message us on WhatsApp at +86 13713157787. No MOQ, no design fees, no obligation. Just a precise price and a realistic lead time for your custom springs, made in China.
