OpeningYour compressor scroll drawing is the starting point. We machine the part exactly to that file, then verify every critical dimension before shipment. No guesswork, no surprises.We run a 20-year
Your compressor scroll drawing is the starting point. We machine the part exactly to that file, then verify every critical dimension before shipment. No guesswork, no surprises.
We run a 20-year-old precision manufacturing facility in Dongguan, China. Our CNC lines handle scroll profiles, flank clearances, and sealing surfaces daily. You send the drawing. We return a part that fits your assembly on the first try.
At a glance: ±0.005 mm tolerance on machined features, 7-day standard lead time, no MOQ, full inspection report with every batch.
| Parameter | Value |
|---|---|
| Materials | Aluminum (6061-T6, 7075-T6), Cast Iron (HT250, QT500), Stainless Steel (304, 316L), Copper Alloys |
| Machines | 5-axis CNC mills, CNC lathes with live tooling, 4-axis machining centers |
| Max part size | 800 mm × 600 mm × 500 mm |
| Tolerance | ±0.005 mm on bores and scroll flanks; ±0.01 mm general |
| Surface finish | Ra 0.4 µm on sealing surfaces; Ra 1.6 µm standard |
| Threads | M2 to M36, internal and external, with thread gauging |
| Batch size | 1 piece to 100,000 pieces per year |
| Lead time | 7 days for prototypes, 15 days for production runs |
| Quality docs | Material certs, CMM inspection report, dimensional check sheet |
| MOQ | No MOQ. One piece is acceptable |
1. Batch-traceable quality. Every batch gets a unique job number. We record material heat numbers, tool wear data, and machine parameters. If a problem appears in your assembly, we trace it back to the exact batch and shift. This is not standard in most shops. It is standard here.
2. Inspection report per batch. You do not have to trust us blindly. Each shipment includes a CMM report with measured values for all critical dimensions. We also photograph the part against the drawing callouts. You check the numbers before you pay the balance. This removes the risk of overseas sourcing.
3. One factory for CNC, stamping, springs, and heat sinks. Your compressor assembly likely needs more than just the scroll part. We also run metal stamping presses, spring coiling machines, and heat sink fabrication lines. You send us the whole BOM. We coordinate all processes under one roof. Fewer suppliers, fewer logistics headaches, lower total cost.
CNC machined compressor scroll parts go into systems that move air or refrigerant under pressure. We supply parts for:
In each case, the buyer is an engineer who needs a reliable part, not a commodity. They send us a drawing because they need a partner who can hold tight tolerances on complex 3D profiles.
Looking for a different part? We also machine Precision CNC Machined Sprockets and Chains | Custom Made to Drawing in the same Dongguan factory.
Q: What is your MOQ? A: No MOQ. We machine a single prototype for testing or a million-piece annual contract. The per-piece price drops with volume, but the quality standard stays the same.
Q: How do you guarantee tolerance and quality? A: We use in-process probing on the machine, then verify with a CMM after machining. Every batch ships with a signed inspection report. If a dimension is out of spec, we rework or scrap it before it leaves the factory. You only pay for parts that pass.
Q: What is your lead time for a custom CNC machined part? A: Prototype parts ship in 7 days after drawing approval. Production runs take 15 days. For urgent breakdowns, we can expedite a single piece in 48 hours at a small surcharge.
Q: Can you provide material certificates and test reports? A: Yes. We provide EN 10204 3.1 material certificates, hardness test reports, and chemical composition analysis. For medical or aerospace applications, we add full traceability documentation at no extra cost.
Stop comparing quotes from middlemen. Send your drawing directly to the factory floor. We respond with a firm quote in 12 hours, including unit price, tooling cost, and delivery date.
Email your PDF or STEP file to sc@bquq.com. Or message us on WhatsApp at +86 13713157787. We speak engineering. We respond fast. And we are ready to machine your compressor scroll part today.
| Parameter | Capability |
|---|---|
| Materials | AL6061/7075, SUS303/304/316, 45# steel, T2 copper, H59 brass, POM, PEEK, nylon |
| Tolerance | ±0.005mm standard, ±0.003mm on request |
| Machines | 3/4/5-axis CNC, turn-mill, Swiss lathe |
| Surface | Anodizing, nickel, zinc, passivation, sandblast, polish |
| Size Range | Max 400 x 300 x 200 mm |
| Prototype | 72 hours, no MOQ on samples |
| Inspection | Full report per batch, CMM data on request |
