Precision Stamped Connector Pins & Sockets | Custom Metal Stamping China
OpeningYour connector design is unique. Your pin geometry, plating thickness, and mating cycle requirements are not off-the-shelf. We build them to your drawing, not from a catalog. Every stamped pin
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your connector design is unique. Your pin geometry, plating thickness, and mating cycle requirements are not off-the-shelf. We build them to your drawing, not from a catalog. Every stamped pin and socket is verified for critical dimensions before shipment.
At a glance: ±0.01 mm stamping tolerance, 7-day standard lead time, no MOQ, 100% inspection report per batch. This is precision manufacturing for engineers who need reliable, repeatable electrical contacts.
We are BQUQ, a factory in Dongguan, China, with 20 years in metal stamping. We also run CNC machining, springs, and heat sinks lines under one roof. Send us your drawing. We will tell you if it can be stamped faster and cheaper than machined.
All materials are sourced with full mill certificates. We stock C5210 and C17200 in-house for fast starts. If you need a specific temper (1/2H, 3/4H, full hard), we order it in 3 days.
Three reasons buyers send us their drawings
1. Batch-traceable quality. Each lot gets a unique heat number and die number. If a pin fails in your field, we trace it back to the coil, the die station, and the operator. No guesswork.
2. Inspection report per batch. You do not have to trust us. Every shipment includes a dimensional report, plating thickness report, and material cert. For high-volume runs, we include SPC data on critical dimensions like pin width and coplanarity.
3. One factory for CNC + stamping + springs + heat sink. Your connector housing needs a stamped contact, a CNC-machined alignment pin, and a compression spring. We make all three. You get one purchase order, one quality system, one shipping point. This cuts your supplier management time in half.
Where these parts are used
Stamped connector pins and sockets are the backbone of electrical interconnects. We supply them for:
Automotive – ECU headers, battery management system connectors, airbag squib pins. Vibration resistance and low contact resistance are critical.
Consumer electronics – USB-C, HDMI, and board-to-board connectors in laptops and phones. We hold coplanarity under 0.05 mm for fine-pitch designs.
Industrial control – Relay sockets, terminal blocks, and PLC I/O modules. These run 24/7; our tin plating ensures 500+ mating cycles.
Medical devices – Disposable sensor connectors and defibrillator pads. We use beryllium copper for high fatigue life in small cross-sections.
Energy storage – Battery pack sense lines and balance connectors. Our selective gold plating reduces corrosion in high-humidity environments.
If your part is currently machined or turned, ask us for a stamping review. We often convert round pins to stamped flat pins with a coined tip, cutting cost by 40% at high volume.
Q: What is your MOQ?
A: No MOQ. We run 1,000 pieces for prototyping and 1,000,000 for production. Tooling cost is amortized into the piece price for small batches. For large batches, tooling is free with a volume commitment.
Q: How do you guarantee tolerance and quality?
A: We use carbide progressive dies with in-die sensors. Critical dimensions are checked every 30 minutes during production. A final 2.5D optical inspection covers 100% of parts for visual defects and key dimensions. You receive the report with your shipment.
Q: What is your lead time?
A: For existing dies, 5–7 days. For new custom metal stamping dies, 15 days for design and build, then 3 days for sample approval. We use 3D die design software and wire-cut EDM, so first articles are right the first time.
Q: Can you provide material certificates and RoHS/REACH compliance?
A: Yes. Every coil comes with a mill test certificate. We also provide RoHS, REACH, and Conflict Minerals declarations on request. Plating thickness is verified with X-ray fluorescence (XRF) and reported per batch.
Send your drawing
Stop guessing if your pin can be stamped. Send us your 2D drawing or 3D model. We will review the geometry, material, and plating. You will get a firm quote in 12 hours, including tooling cost, piece price, and lead time. No obligation.
This is custom metal stamping made in China, but with the engineering rigor you expect from a local shop. We speak English, we respond fast, and we ship worldwide via DHL or FedEx.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Send your drawing today. Get a precision stamped connector pin that meets your spec, on time, with no MOQ.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.