OpeningSolar PV mounting brackets are structural parts. They hold panels in wind, rain, and thermal cycling. A bracket that fails costs far more than the bracket itself.We make the
Custom Solar PV Mounting Brackets | Precision Metal Stamping No MOQ
OpeningSolar PV mounting brackets are structural parts. They hold panels in wind, rain, and thermal cycling. A bracket that fails costs far more than the bracket itself.We make these brackets to your
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Solar PV mounting brackets are structural parts. They hold panels in wind, rain, and thermal cycling. A bracket that fails costs far more than the bracket itself.
We make these brackets to your drawing. Not from a catalog. Not from a "standard" we hope matches your design.
Every part is verified before shipment. Dimensional reports are generated from actual CMM inspection, not from a template. You get what you drew.
Tolerance: ±0.05 mm on critical stamped features
Lead time: 15–25 days for stamped parts after drawing approval
50 pcs (prototype) to 500,000 pcs (mass production)
Inspection
CMM, optical comparator, hardness tester, salt spray tester
Certifications
ISO 9001:2015, material certificates (EN 10204 3.1)
Lead time
15–25 days for stamping; 5 days for CNC prototype
All dies are designed in-house. We use CAD/CAM simulation before steel is cut. This reduces try-out time and ensures your tolerance is met on the first production run.
Three Reasons Buyers Send Us Their Drawings
1. Batch-Traceable Quality
Each batch gets a unique heat number and production lot code. Raw material certificates are kept on file for 10 years. If a problem appears in the field, we can trace it to the exact coil of steel and the exact press stroke. No guesswork.
2. Inspection Report Per Batch
You do not have to ask for the report. It is included with every shipment. The report includes: dimensional measurements (5 pieces per batch), material thickness verification, surface finish check, and salt spray test results if required. We sign it. We stand behind it.
3. One Factory for Stamping, CNC, Springs, and Heat Sinks
Your bracket may need a spring clip, a CNC-machined rail, or a heat sink for the junction box. We do all four processes under one roof. No third-party coordination. No shipping parts between suppliers. Fewer emails, fewer delays, fewer excuses.
Where These Parts Are Used
Custom metal stamping for solar PV is not limited to the panel frame. Our brackets are used in:
Roof-mounted rail systems: L-feet, rail splices, and end clamps stamped from SGCC with hot-dip galvanizing.
Ground-mount arrays: Heavy-gauge (3.0–6.0 mm) base plates and support brackets for high wind load zones.
Solar tracker mechanisms: Precision stamped pivot brackets with ±0.05 mm tolerance for smooth actuator movement.
Module clamps and mid-clamps: Spring-steel reinforced clamps that hold panels under vibration.
Cable management: Stamped cable clips and tray brackets with rounded edges to protect PV wire insulation.
Battery storage enclosures: Stamped mounting plates for inverter and battery racks in residential and commercial systems.
These parts are made in China, but they are made to international standards. We export to installers in Germany, Australia, the US, and the Middle East. The quality does not change based on the destination port.
Q: What is your MOQ?
A: No MOQ. We run prototypes from 50 pieces. For production, we recommend 5,000+ pieces per order to amortize die costs, but we will quote 500 pieces if that is your need.
Q: How do you guarantee tolerance and quality?
A: First article inspection (FAI) is done on every new die. We send you the FAI report with CMM data before mass production. During production, we check 5 pieces every 2 hours. Final inspection covers 100% of critical dimensions on a sample per AQL 2.5.
Q: What is the lead time?
A: Prototype stamping: 15 days. Production stamping: 20–25 days after die approval. If you need parts faster, we can use soft tooling for short runs and ship in 10 days. CNC prototype parts can ship in 5 days.
Q: Can you provide material certificates?
A: Yes. Every order includes mill test certificates for the raw material. For stainless steel, we provide EN 10204 3.1 certificates. For galvanized steel, we provide coating weight and adhesion test results.
Send Your Drawing
We quote firm prices, not estimates. Send us your 2D drawing (PDF or DWG) or 3D model (STEP or IGES). We will review the design for manufacturability and reply within 12 hours with a fixed unit price, tooling cost (if any), and lead time.
Precision manufacturing is our only business. Custom metal stamping is what we do 24 hours a day, 6 days a week.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Send your drawing today. Get a firm quote tomorrow.
