Precision Stamped Power Terminals Collection | Custom Metal Stamping, No MOQ
OpeningYour power terminal drawing is the starting point. We turn it into a stamped part that meets your tolerance, surface, and batch requirements. Every piece is made to your drawing, not a generic
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your power terminal drawing is the starting point. We turn it into a stamped part that meets your tolerance, surface, and batch requirements. Every piece is made to your drawing, not a generic catalog item. We verify dimensions and material before shipment, so you receive parts that fit your assembly the first time.
At a glance: Tolerances down to ±0.05 mm on critical features, lead time 7–15 days for standard batches, no MOQ for prototype or production runs. We ship from our Dongguan factory, made in China, with full inspection reports on request.
In-house die design and fabrication, die life up to 1 million strokes
Batch size
100 pieces to 10 million pieces, no MOQ
Lead time
Samples 3–5 days, production 7–15 days after drawing approval
Quality system
ISO 9001:2015, 100% dimension check on critical features, batch traceability
Our presses range from 25 to 250 tons, handling both thin precision parts and heavier power terminals. We use progressive dies for high-volume consistency and compound dies for complex geometries. Fine blanking is available for parts requiring a smooth shear edge.
Three reasons buyers send us their drawings
1. Batch-traceable quality. Every lot gets a unique batch number. We record material heat number, die number, and operator for each run. If a problem appears in your assembly, you can trace it back to our production records in minutes. No guesswork.
2. Inspection report per batch. You receive a dimensional report with every shipment. It lists measured values for critical features, material thickness, and surface condition. We use CMM and optical projectors for verification. The report is signed by our QC engineer, not a machine printout.
3. One factory for CNC + stamping + spring + heatsink. Your power terminal often sits next to a stamped spring contact or a CNC-machined heatsink. We do all of them under one roof. You send one drawing package, get one quote, one lead time, one shipping point. Fewer suppliers means fewer coordination headaches and faster problem solving.
Where these parts are used
Precision stamped power terminals appear in high-current and high-cycle applications. We supply parts for:
Electric vehicle battery packs – busbar terminals and cell connectors rated for 100–300 A continuous current.
Industrial power supplies – blade terminals, ring terminals, and quick-connect tabs for 48 V to 600 V systems.
Solar inverters – stamped copper lugs and grounding terminals with tin or silver plating for corrosion resistance.
Automotive relays and contactors – stamped contact springs and terminal blades that survive 100,000+ switching cycles.
Energy storage systems – nickel-plated copper terminals for rack-mounted battery modules.
Consumer electronics – small power jack terminals and battery contacts in devices drawing 5–20 A.
These parts share one requirement: consistent electrical conductivity and mechanical fit across thousands of pieces. Our stamping process delivers that consistency.
Q: Do you really have no MOQ?
A: Yes. We accept prototype orders of 100 pieces and production orders of millions. Tooling cost is quoted separately for new dies. For existing dies, you pay only for parts.
Q: How do you control tolerance and quality?
A: We use progressive dies with in-die sensors for thickness and position. After stamping, we check critical dimensions with CMM and optical projectors. Every batch gets a full inspection report. If a dimension is out of spec, we sort or rework before shipping.
Q: What is the lead time for stamped terminals?
A: For parts with existing dies, samples ship in 3–5 days, production in 7–15 days. For new dies, add 10–15 days for design and fabrication. We confirm exact timing after reviewing your drawing.
Q: Can you provide material certificates?
A: Yes. We supply mill certificates for copper, brass, and stainless steel on request. Each certificate lists the heat number, chemical composition, and mechanical properties. We keep records for 5 years.
Send your drawing
Send us your 2D or 3D drawing for a firm quote. We reply within 12 hours with pricing, lead time, and die cost if applicable. We review manufacturability and suggest changes if your design can be stamped more efficiently.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Precision manufacturing starts with a conversation. We are ready to talk.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.