Custom CNC Machined Cabinet Hinges Brass | Precision Made in China
OpeningWe machine your brass cabinet hinge drawings to spec, not to a catalog. Every batch is verified before shipment. You send the file; we handle the tolerances, the surface finish, and the paperwo
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
We machine your brass cabinet hinge drawings to spec, not to a catalog. Every batch is verified before shipment. You send the file; we handle the tolerances, the surface finish, and the paperwork.
At a glance: ±0.01 mm machining tolerance, 7-10 day lead time, no MOQ, ISO 9001:2015 certified shop.
Specifications
Parameter
Value
Material
Brass C36000, C46400, C26000, or your specified grade
CMM full report per batch, material certs included
Lead Time
7 days for prototypes, 10-14 days for production runs
Batch Size
1 piece to 100,000+ pieces, no MOQ
Country of Origin
Made in China, Dongguan factory
Three reasons buyers send us their drawings
1. Batch-traceable quality. Each hinge gets a unique batch number. We track material heat, machine operator, and tooling from the first cut to the final inspection. If you need to trace a defect, we give you the full history in one report. No guesswork.
2. Inspection report per batch. You do not have to trust us on word alone. Every batch ships with a dimensional report, a material certificate, and surface finish readings. The CMM data matches your drawing, or we rework it at our cost. Simple.
3. One factory for CNC + stamping + springs + heat sinks. Your cabinet hinge might need a stamped steel base plate, a torsion spring, or a heat sink for an LED-lit hinge. We run all four lines under one roof. You get one PO, one quality system, one shipping date. No coordinating three suppliers across time zones.
Where these parts are used
Brass CNC machined hinges are not decorative-only parts. They carry load, resist corrosion, and hold alignment over thousands of cycles. We machine them for:
Marine and RV cabinetry – Brass resists saltwater corrosion. Hinges hold up against constant vibration and humidity.
High-end architectural hardware – Precision-machined brass hinges for commercial doors, museum cases, and luxury retail displays. The surface finish matters as much as the fit.
Medical equipment housings – Small brass hinges for instrument cases, where the hinge must open and close cleanly for 50,000+ cycles without slop.
Aerospace interior fixtures – Lightweight brass alloys with tight tolerances for galley doors and storage bins. Every part is traceable.
Electrical enclosures – Hinges that ground the door to the frame. The CNC machining ensures consistent contact pressure and low electrical resistance.
Q: What is your MOQ?
A: No MOQ. We machine one prototype for your fit test, or 100,000 pieces for production. The unit price drops as quantity increases, but the quality standard stays the same.
Q: How do you guarantee tolerance and quality?
A: We use a 3D model to program the CNC path, not a 2D sketch. First article is inspected on a CMM before we start the batch. Then we inspect every 20th piece during the run. The final report is included with your shipment. If any dimension is out of spec, we replace the batch.
Q: What is your lead time?
A: Prototypes ship in 7 days. Production runs of 1,000+ pieces ship in 10-14 days, depending on surface finish and secondary operations. We quote a firm date with your price, and we hit it.
Q: Can you provide material certificates?
A: Yes. Every brass batch comes with a mill certificate showing the alloy composition and mechanical properties. We keep the certs on file for 10 years. If your customer audits us, we pass.
Send your drawing
Email your 3D model (STEP, IGES, or X_T) or 2D PDF to sc@bquq.com. We reply with a firm quote in 12 hours. Include your target quantity, surface finish, and any plating requirements. For urgent projects, call or WhatsApp +86 13713157787. We are a precision manufacturing shop with 20 years of custom CNC machining experience. Your drawing is safe with us, and your parts will be right.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.