OpeningWe machine brake disc rotors to your drawing. Not from our catalog. Not from a stock blank. We cut, drill, and finish the exact geometry you specify. Every part is verified
Custom CNC Machined Brake Disc Rotor Parts | Precision Manufacturing
OpeningWe machine brake disc rotors to your drawing. Not from our catalog. Not from a stock blank. We cut, drill, and finish the exact geometry you specify. Every part is verified before shipment. You
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
We machine brake disc rotors to your drawing. Not from our catalog. Not from a stock blank. We cut, drill, and finish the exact geometry you specify. Every part is verified before shipment. You get a rotor that fits your caliper, your hub, and your performance target.
Tolerance: ±0.005 mm on critical bore and friction faces
Surface finish: Ra 0.4 µm on machined surfaces
Lead time: 7–15 days for prototypes, 15–25 days for production runs
No MOQ – order one piece or ten thousand
Material certs and inspection report included with every batch
We are a precision manufacturing factory in Dongguan, China, with 20 years in CNC machining, metal stamping, springs, and heat sinks. You send the drawing. We handle the rest.
CMM, profilometer, hardness tester, salt spray test
Full report per batch
Lead time
7 days for prototypes, 15 days for production
Expedite available for urgent orders
We do not outsource. All CNC machining, deburring, cleaning, and inspection happen in our own 8,000 m² facility. That means shorter lead times and fewer excuses.
Three reasons buyers send us their drawings
1. Batch-traceable quality.
Every rotor gets a unique batch number. We record material heat number, machine operator, tool offsets, and inspection results. If a problem appears on your line, we trace it to the exact batch and hour. No guesswork. No finger-pointing.
2. Inspection report per batch.
You do not have to trust us. You get a PDF with dimensional measurements, surface finish readings, and material certs for every batch. Critical dimensions are checked on a CMM with a resolution of 0.001 mm. If a value is out of spec, we reject the part before it ships. You will never see a non-conforming rotor.
3. One factory for CNC + stamping + spring + heat sink.
Your brake assembly may need a stamped backing plate, a return spring, or a heat sink for the caliper. We make all of them under one roof. You deal with one engineer, one invoice, one quality system. Fewer suppliers means fewer interface problems. We have done this for 20 years.
Where these parts are used
CNC machined brake disc rotors are not just for cars. We supply parts for:
Motorcycle and scooter brakes – lightweight aluminum rotors with stainless steel friction rings, machined to ±0.01 mm for wobble-free stopping.
Industrial servo motors – small diameter rotors for electromagnetic brakes, with tight bore tolerances for press-fit onto motor shafts.
Elevator and hoist safety brakes – cast iron rotors with drilled ventilation holes, balanced to G2.5 to prevent vibration at high RPM.
Off-road and ATV vehicles – thick rotors with aggressive slot patterns, machined from 42CrMo4 for high heat resistance.
Robotics and automation – precision rotors for small brake modules, where repeatability matters more than size.
In every case, the rotor is a safety part. We treat it that way. Our QC team has a zero-tolerance policy for cracks, porosity, or dimensional drift.
Q: Do you really have no MOQ?
A: Yes. We machine one prototype for testing or a full production run. The unit price for one piece is higher, but the quality and inspection are identical. No MOQ is our standard for custom CNC machining.
Q: What tolerance can you hold on the bore and friction faces?
A: We hold ±0.005 mm on the bore and ±0.01 mm on bolt circles. Friction faces are flat within 0.02 mm. We verify with a CMM and a profilometer. If your drawing requires tighter, we can discuss grinding after CNC machining.
Q: What is your typical lead time?
A: Prototypes ship in 7–10 days after drawing approval. Production runs of 500+ pieces ship in 15–25 days, depending on material availability. We stock common aluminum and steel blanks to cut lead time.
Q: Can you provide material certificates?
A: Yes. Every batch comes with a mill certificate for the raw material, plus our own hardness and chemical composition test results. For aerospace or automotive safety applications, we also provide PPAP documents on request.
Send your drawing
Stop guessing. Send us your 2D or 3D drawing, and we will return a firm quote within 12 hours. We will confirm material, tolerance, finish, and lead time. No hidden costs, no vague promises.
Email: sc@bquq.com
WhatsApp: +86 13713157787
We are a precision manufacturing factory made in China, but our quality system is world-class. Your brake rotor deserves better than a gamble. Get a quote today.
