Precision CNC Machined Dental Implant Parts | Custom Made in China
OpeningYour dental implant design deserves better than a generic catalog part. We machine it to your drawing, verify every critical dimension before shipment, and ship with a full inspection report.To
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your dental implant design deserves better than a generic catalog part. We machine it to your drawing, verify every critical dimension before shipment, and ship with a full inspection report.
Tolerance: ±0.005 mm on critical features
Lead time: 7–10 working days for prototypes, 15–20 for production runs
ISO 13485 certified, batch traceability with material certs
Lead time
7–10 days for prototypes, 15–20 days for production
We hold tolerances that matter for implant interfaces—taper fits, thread forms, and mating surfaces. If your drawing calls for it, we measure it and report it.
Three reasons buyers send us their drawings
1. Batch-traceable quality.
Every batch gets a unique lot number. We track material heat numbers, machine parameters, and operator IDs. If a question comes up six months later, we can pull the full history in minutes.
2. Inspection report per batch.
You do not have to trust us. We send a dimensional report with every shipment—CMM data, surface finish readings, and thread inspection results. Your incoming QC can verify against our numbers in minutes.
3. One factory for CNC + stamping + springs + heat sinks.
Most dental implant assemblies need more than one process. We run CNC machining, metal stamping, spring coiling, and heat sink fabrication under one roof. That means one supplier, one set of quality docs, and no finger-pointing between vendors.
Where these parts are used
Our CNC machined dental implant parts go into real clinical and laboratory applications:
Implant abutments—titanium or zirconia, custom angles, and gingival heights machined to your specs.
Healing caps and cover screws—small, precise, often with internal hex or torx drives.
Scan bodies—used in digital impression systems, require exact geometry for accurate scanning.
Temporary abutments—PEEK or titanium, machined for single-use or short-term placement.
Implant drivers and insertion tools—stainless steel, with precise torque-transfer features.
Laboratory analogs—replica implant components for model work, machined to tight tolerances for a correct fit.
These parts see daily handling in surgical and lab environments. They must fit, seal, and torque correctly every time. Our machining holds that consistency.
Q: What is your minimum order quantity?
A: No MOQ. We machine one prototype or a full production run. Many buyers start with 2–5 pieces for validation, then scale up.
Q: How do you guarantee tolerance and quality?
A: We use calibrated CMM and optical equipment for inspection. Every batch ships with a dimensional report. Critical features are 100% inspected, not sampled.
Q: What is your lead time for custom CNC machining?
A: Prototypes ship in 7–10 working days after drawing approval. Production runs of 500+ pieces typically take 15–20 working days. Rush service is available for urgent cases.
Q: Can you provide material certificates?
A: Yes. We supply mill certificates for all raw materials, including titanium and stainless steel. Heat numbers are recorded and traceable to your batch.
Send your drawing
Stop sourcing implant parts from multiple vendors. Send us your drawing and get a firm quote within 12 hours.
Email: sc@bquq.com
WhatsApp: +86 13713157787
We respond with pricing, lead time, and a DFM review if we spot any manufacturability issues. No obligation, no pressure—just a clear answer for your custom CNC machining project.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.