Custom CNC ER25 Spring Collet Chuck with Tap for Precision Tapping
OpeningYour drawing drives our process. We machine the ER25 spring collet chuck with tap to your exact geometry, not a stock approximation. Every taper, every thread, every relief angle is verified be
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing drives our process. We machine the ER25 spring collet chuck with tap to your exact geometry, not a stock approximation. Every taper, every thread, every relief angle is verified before shipment.
Tolerance: ±0.005 mm on taper and bore
Lead time: 7–12 days for prototypes, 15–20 days for production runs
No MOQ: one piece or ten thousand, same attention
Material: 20CrMnTi or 8620 steel, carburized to 58–62 HRC
We are a precision manufacturing factory in Dongguan, China, with 20 years of CNC machining experience. Your custom CNC collet chuck is made on our own machines, inspected on our own CMM, and shipped with a report. No middlemen. No guesswork.
We use hardened and ground collets, not turned-only blanks. The tap drive section is machined with a square or hexagonal pocket, matched to your tap shank. Runout is held below 0.01 mm to protect tap life and thread quality.
Three reasons buyers send us their drawings
1. Batch-traceable quality.
Each heat of steel is logged. Each batch gets a unique number. If a problem appears in your assembly line, we trace it back to the exact machine, operator, and inspection record. No ambiguity.
2. Inspection report per batch.
You get a dimensional report with every shipment. Taper angle, concentricity, hardness, and surface finish are all listed. We do not ask you to trust us—we give you data.
3. One factory for CNC + stamping + springs + heat sinks.
Your collet chuck is one part of a larger assembly. We also run stamping presses, spring coiling machines, and heat sink lines. Send us the whole BOM. We reduce your supplier list, your shipping cost, and your lead time.
Where these parts are used
CNC tapping centers: ER25 collet chucks with tap drive are used in rigid tapping cycles on vertical and horizontal machining centers. The collet holds the tap shank without slipping, while the square drive transmits torque.
Automatic tool changers: In high-volume production, the chuck is mounted in a tool holder and changed automatically. Consistent taper geometry ensures repeatable tool centerline.
Multi-spindle machines: Where space is tight, our custom collet chucks fit shorter gauge lengths, allowing deeper Z-axis reach.
Automotive powertrain lines: Threading holes in engine blocks, transmission cases, and brake calipers. Cycle times under 10 seconds per hole.
Aerospace structural parts: Titanium and aluminum frames require clean threads with no tearing. Our chuck holds the tap rigidly, reducing chatter and thread form errors.
Q: What is your MOQ?
A: No MOQ. We machine one piece for prototyping or 50,000 for production. The unit price drops with quantity, but the quality standard does not.
Q: How do you control tolerance and quality?
A: We use a CMM for taper and concentricity checks on every batch. Hardness is verified with a Rockwell tester. We also do a 100% functional test with a master collet and a standard tap. The inspection report is included in the shipment.
Q: What is your lead time?
A: For a custom ER25 collet chuck with tap, sample delivery is 7–12 days after drawing approval. Production runs of 500 pieces take 15–20 days. Rush orders are possible—call us to confirm.
Q: Can you provide material certificates?
A: Yes. We supply mill certificates for the raw steel, heat treatment reports, and a full dimensional inspection report. All documents are in English and can be notarized if needed.
Send your drawing
We reply with a firm quote within 12 hours. Send your PDF or STEP file. We will confirm material, tolerance, and price—no hidden costs.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Your custom CNC collet chuck, made in China, machined to your drawing, verified before shipment. No MOQ. Send it today.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.