OpeningYour drawing is the starting point. We make the part exactly to that drawing. Every bracket is verified before shipment. We do not guess.This is a collection of precision stamped electronic bra
Your drawing is the starting point. We make the part exactly to that drawing. Every bracket is verified before shipment. We do not guess.
This is a collection of precision stamped electronic brackets. They hold, shield, mount, and connect components inside electronics that run 24/7. If you need a bracket that fits perfectly and survives vibration, heat, and time, this is the right product line.
| Parameter | Value |
|---|---|
| Materials | SPCC, SECC, SUS301, SUS304, 5052 aluminum, C2680 brass, T2 copper |
| Material thickness | 0.1 mm – 5.0 mm |
| Machine capacity | 25-ton to 250-ton high-speed and precision presses |
| Progressive dies | Up to 16 stations, carbide tooling for high-volume runs |
| Tolerances | ±0.05 mm standard, ±0.02 mm on request |
| Surface finish | As-stamped, deburred, brushed, or per your spec |
| Plating / coating | Zinc, nickel, tin, chrome, powder coat, anodize, passivation |
| Secondary operations | Tapping, countersinking, bending, welding, riveting, assembly |
| Inspection | CMM, optical comparator, calipers, pin gauges, surface roughness tester |
| Batch size | No MOQ — prototypes to mass production |
| Lead time | Tooling: 5–10 days; samples: 7–15 days; production: 15–25 days |
| Certifications | ISO 9001:2015, material certificates available per batch |
1. Batch-traceable quality. Every lot gets a unique batch number. We track material heat numbers, die settings, and inspection results for that batch. If a problem appears in your assembly line, we can trace it back to the exact stamping run and tell you what changed. No guesswork.
2. Inspection report per batch. You receive a dimensional inspection report with every shipment. Critical features are measured on a CMM and documented. We also include material certificates and plating thickness reports when required. You do not need to re-inspect everything on arrival.
3. One factory for CNC + stamping + spring + heatsink. Your bracket might need a machined insert, a spring clip, or a heatsink attached. We do all of it in-house. You send one drawing package, deal with one quality team, and receive one shipment. Fewer suppliers means fewer tolerance stack-ups and less logistics headache.
Precision stamped electronic brackets appear in products where failure is not an option.
If your part holds something in place inside an electronic device, we can stamp it.
Looking for a different part? We also machine Precision Stamped Connector Shells | Custom Metal Stamping No MOQ in the same Dongguan factory.
Q: What is your MOQ? A: No MOQ. We run 10-piece prototypes and 100,000-piece production orders on the same machines. Tooling cost is quoted separately for new dies, but we can also use soft tooling for short runs to keep your upfront cost low.
Q: How do you guarantee tolerance and quality? A: We use progressive dies with precision guides and hard tooling. Every batch is inspected with CMM and optical comparators. Critical dimensions are checked at the press every 2 hours during production. You get the inspection report with the shipment.
Q: What is your lead time? A: Prototype samples ship in 7–15 days after drawing approval. Production orders ship in 15–25 days. For repeat orders with existing tooling, we can often ship in 10 days. Rush service is available.
Q: Can you provide material certificates? A: Yes. We provide mill test certificates for the raw material batch used in your order. Plating thickness reports and RoHS/REACH compliance documents are available on request.
We are a precision manufacturing factory in Dongguan, China, with 20 years in custom metal stamping. We have the machines, the tooling shop, and the inspection lab under one roof.
Send us your 2D or 3D drawing. We will review the geometry, suggest material and tolerance improvements if we see them, and give you a firm quote within 12 hours.
Email: sc@bquq.com WhatsApp: +86 13713157787
Made in China, verified before shipment. Your drawing is our instruction.
| Parameter | Capability |
|---|---|
| Materials | SPCC, SGCC, SUS301/304/316, brass, copper, beryllium copper, phosphor bronze |
| Process | Progressive die stamping, fine blanking, deep drawing, bending, tapping |
| Tolerance | ±0.01mm standard, ±0.005mm on request |
| Surface | Zinc plating, nickel, tin, gold, powder coating, passivation, anodizing |
| Die Size | Up to 1200 x 800 mm, 16-250 ton presses |
| Thickness | 0.05 - 6.0 mm sheet metal, wire 0.1 - 8.0 mm |
| Prototype | 7-15 days tooling, no MOQ on samples |
| Inspection | Full report per batch, CMM and optical measurement |
