For production volumes above 1,000 units, stamping is the superior choice, delivering per-part costs as low as USD 0.05 and tolerances of ±0.05 mm. For low volumes, prototyping, or
To specify springs correctly on engineering drawings, you must define the wire diameter, coil dimensions, free length, solid height, spring rate, and material, and then apply GD&am
Choosing between Aluminum 6061 and 7075 for CNC machined parts comes down to a trade-off: 6061 offers superior corrosion resistance, weldability, and lower cost, while 7075 provide
For a typical aerospace component such as a landing gear bushing or an actuator housing, CNC machining achieves dimensional tolerances of ±0.005 mm (0.0002 inches) with surface fin
To order custom springs correctly, you must provide at minimum these seven specifications: wire diameter, outer diameter, free length, total coils, material grade, load at a define
