OpeningYour antenna mount bracket drawing becomes a finished part in as few as 7 days. We machine it from your CAD file, inspect it against your tolerances, and ship only after ver
Custom CNC Machined Antenna Mount Brackets | Precision Manufacturing
OpeningYour antenna mount bracket drawing becomes a finished part in as few as 7 days. We machine it from your CAD file, inspect it against your tolerances, and ship only after verification. No protot
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your antenna mount bracket drawing becomes a finished part in as few as 7 days. We machine it from your CAD file, inspect it against your tolerances, and ship only after verification. No prototypes hidden in a batch. Every piece is measured and documented.
3-axis, 4-axis, 5-axis CNC milling centers; CNC turning centers with live tooling
Tolerance
Standard ±0.01 mm; precision ±0.005 mm
Surface finish
Ra 0.8 µm as-machined; Ra 0.4 µm on request
Finishing options
Clear or black anodize, hard anodize, passivation, nickel plating, powder coating, bead blasting
Batch size
1–50,000 pieces, no MOQ
Inspection
CMM full report, first article inspection (FAI), material certificates
Lead time
7 days for prototypes, 10–12 days for production batches
File formats
STEP, IGES, STP, X_T, PDF, DWG, DXF
All parts are deburred and thread-checked before packing. For antenna brackets, we pay extra attention to hole alignment and flatness—critical for signal performance and mounting stability.
Three reasons buyers send us their drawings
1. Batch-traceable quality
Every batch gets a unique job number. We record material lot, machine used, operator, and inspection results. If a problem appears in the field, we trace it back to the exact heat and tool path. You get full accountability, not vague promises.
2. Inspection report per batch
You receive a dimensional inspection report with every shipment. It lists measured values against your drawing tolerances. Critical features like hole diameters, slot widths, and thread positions are verified with CMM or calibrated gauges. No surprises at your incoming QC.
3. One factory for CNC + stamping + springs + heat sinks
Your antenna mount bracket often needs a spring clip, a stamped ground plate, or a heat sink for the RF amplifier. We make all of them under one roof. This cuts logistics cost, shortens lead time, and eliminates tolerance mismatches between suppliers. One drawing, one responsible party.
Where these parts are used
CNC machined antenna mount brackets are not shelf items. They are engineered for specific environments:
Base station antennas – Brackets that hold panel antennas on towers or rooftops. They must withstand wind load and vibration. We machine them from 6061-T6 aluminum with hard anodize for corrosion resistance.
Vehicle-mounted antennas – Rugged brackets for trucks, buses, and emergency vehicles. Stainless steel 304 or 316 is common. We add passivation to resist road salt and moisture.
Marine and offshore communication – Brackets exposed to salt spray. We use 316 stainless or aluminum with heavy-duty powder coating.
RFID and IoT devices – Small precision brackets for indoor readers and sensors. Tight tolerances ensure consistent antenna alignment.
Satellite and GPS systems – High-stability brackets with thermal expansion matched to the antenna housing. PEEK or aluminum with specific surface finishes.
Defense and aerospace – Mil-spec brackets with full material traceability and FAI reports. We machine to your exact drawing, no substitutions.
If your part has threaded holes, press-fit inserts, or critical datum features, we handle them in the same setup to maintain accuracy.
Q: What is the minimum order quantity?
A: No MOQ. We machine one piece for testing or 50,000 for production. The unit price drops with quantity, but we never force you to over-order.
Q: How do you guarantee tolerance and quality?
A: We use calibrated CNC machines and verify with CMM. Every batch includes a dimensional inspection report. For critical features, we perform 100% inspection. If a part fails, we rework or remake it at no cost.
Q: What is the lead time for a custom bracket?
A: Prototypes ship in 7 days after drawing approval. Production batches of 100–1,000 pieces ship in 10–12 days. Larger orders may take 15–18 days depending on material availability.
Q: Can you provide material certificates?
A: Yes. We supply mill certificates for all metal materials, including chemical composition and mechanical properties. For aerospace or defense, we provide full traceability documentation.
Send your drawing
Send us your 2D or 3D file. We will review it for manufacturability and send a firm quote within 12 hours. No hidden fees, no vague pricing. You get unit price, tooling cost (if any), and lead time in one email.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Precision manufacturing, made in China, with no MOQ and verified quality. Your antenna bracket is ready to be machined. Send the drawing.
