Your reel design, machined exactly to print. We run your CAD file through our 3-axis and 5-axis CNC centers, cut from bar stock or near-net forgings, and verify every
Your reel design, machined exactly to print. We run your CAD file through our 3-axis and 5-axis CNC centers, cut from bar stock or near-net forgings, and verify every critical dimension b
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
## Opening Your reel design, machined exactly to print. We run your CAD file through our 3-axis and 5-axis CNC centers, cut from bar stock or near-net forgings, and verify every critical dimension before the parts leave our floor. No surprises in your assembly line.
## Specifications We build fishing reel parts that see salt spray, torque, and continuous cycling. The table below lists what we hold as standard on custom CNC machining work.
| Parameter | Value |
|---|---|
| Materials | 6061-T6, 7075-T6 aluminum; 304/316 stainless steel; C36000 brass; POM/Delrin; titanium (Grade 5) |
| Machines | 3-axis vertical mills, 5-axis simultaneous, Swiss-type lathes (up to Ø32 mm bar) |
| Process | Milling, turning, drilling, tapping, thread whirling, wire EDM for complex slots |
| Tolerance | ±0.005 mm on machined features; ±0.01 mm on general dimensions |
| Surface finish | Ra 0.4 µm on sealing faces; Ra 0.8 µm standard; bead blast, anodize (Type II/III), electroless nickel, passivation |
| Batch size | 1–50,000 pieces; no MOQ |
| Inspection | CMM (Zeiss), optical comparators, surface roughness tester; full dimensional report per batch |
| Lead time | Prototype: 3–5 days; production: 7–12 days after drawing approval |
| Certifications | ISO 9001:2015; material certs (EN 10204 3.1) available on request |
## Three reasons buyers send us their drawings 1. Batch-traceable quality. Every batch gets a unique job number. We record tool paths, machine IDs, and operator initials for each run. If a part fails in your field test, we trace it back to the exact shift and tool offset. No guesswork.
2. Inspection report per batch. You get a PDF with CMM coordinates for critical features, surface finish readings, and material hardness data. Our QC team signs off before parts go to packaging. For high-volume orders, we include SPC charts on request.
3. One factory for CNC + stamping + springs + heat sinks. Your reel might need a CNC-machined body, a stamped spool plate, a torsion spring for the drag lever, and a heat sink for the carbon drag washer. We do all four in-house. You deal with one supplier, one shipping point, one invoice. Less coordination, fewer delays.
These parts also go into conventional trolling reels and electric reels used in deep-sea fishing, where corrosion resistance and impact strength are non-negotiable.
## Questions buyers ask before ordering Q: Do you really have no MOQ? A: Yes. We run prototypes and one-off replacement parts on the same machines as production orders. Tooling and setup costs are quoted separately for small batches, but the per-piece price drops predictably as quantity increases.
Q: How do you guarantee tolerance and quality? A: Our machines are calibrated weekly. We use in-process probing for critical features, then verify with a CMM on a sample basis — 100% for high-risk dimensions. You receive the inspection report with the shipment. If anything is out of spec, we re-machine or refund at your choice.
Q: What is the lead time for custom CNC machining? A: Prototypes ship in 3–5 days after drawing approval. Production runs of 500–5,000 pieces take 7–12 days. For urgent orders, we can split the batch and air-ship the first 100 pieces while the rest finish by sea.
Q: Can you provide material certificates? A: Yes. We supply EN 10204 3.1 mill certificates for stainless steel, aluminum, and titanium. For aerospace or marine-grade materials, we source from certified mills and include full traceability documentation.
## Send your drawing Email your PDF or STEP file to sc@bquq.com. We reply with a firm quote in 12 hours — including tooling cost, unit price, and delivery date. For urgent questions, WhatsApp +86 13713157787. Precision manufacturing, made in China, with no MOQ and a QC report on every box. Send us your drawing today.
Looking for a different part? We also machine Precision CNC Machined Aerospace Parts | Aluminum & Titanium | No MOQ in the same Dongguan factory.
| Parameter | Capability |
|---|---|
| Materials | AL6061/7075, SUS303/304/316, 45# steel, T2 copper, H59 brass, POM, PEEK, nylon |
| Tolerance | ±0.005mm standard, ±0.003mm on request |
| Machines | 3/4/5-axis CNC, turn-mill, Swiss lathe |
| Surface | Anodizing, nickel, zinc, passivation, sandblast, polish |
| Size Range | Max 400 x 300 x 200 mm |
| Prototype | 72 hours, no MOQ on samples |
| Inspection | Full report per batch, CMM data on request |
