OpeningYour hinge or knob design is unique. We machine it exactly to your drawing. No guesswork, no off-the-shelf substitutes.Every batch is verified before shipment. We check crit
Precision CNC Machined Furniture Hardware Hinges Knobs Made to Drawing
OpeningYour hinge or knob design is unique. We machine it exactly to your drawing. No guesswork, no off-the-shelf substitutes.Every batch is verified before shipment. We check critical dimensions, thr
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your hinge or knob design is unique. We machine it exactly to your drawing. No guesswork, no off-the-shelf substitutes.
Every batch is verified before shipment. We check critical dimensions, thread fit, and surface finish on a CMM. You receive parts that assemble correctly the first time.
Tolerance: ±0.01 mm on critical features
Lead time: 7–12 working days for prototypes, 15–20 for production
No MOQ – order 1 piece or 10,000
Material certs available for every batch
Factory: Dongguan, China – 20 years in precision manufacturing
As-machined 3.2 Ra, up to 0.4 Ra polished; anodizing, powder coat, PVD, nickel/chrome plating
Threads
Internal/external, UNF/UNC/Metric, class 2A/3A, 2B/3B
Batch Size
1–50,000+ pieces, no MOQ
Inspection
First article inspection (FAI), in-process checks, final CMM report
Lead Time
Prototype 7–12 days, production 15–20 days (DDP available)
Certifications
ISO 9001:2015, material mill certs, RoHS/REACH compliance
Three Reasons Buyers Send Us Their Drawings
1. Batch-Traceable Quality
Each batch gets a unique job number. Raw material lot, machine operator, tooling, and inspection results are recorded. If a problem appears in your assembly line, we trace it back to the exact batch and fix it fast. No mystery parts.
2. Inspection Report Per Batch
You get a dimensional inspection report with every shipment. Critical features are measured and recorded. We do not ship blind. If a dimension is out of spec, we catch it before it reaches your dock.
3. One Factory for CNC + Stamping + Spring + Heatsink
Your furniture hardware often needs more than just machining. A hinge may need a stamped bracket, a spring-loaded mechanism, or a heatsink for a motorized lift. We run all four lines under one roof. You send one drawing package, deal with one engineer, receive one consolidated shipment. Fewer suppliers, fewer delays, lower total cost.
Where These Parts Are Used
CNC machined furniture hardware appears in applications where strength, finish, and repeatability matter.
Concealed hinges for high-end kitchen cabinets – aluminum or stainless, machined to ±0.01 mm for silent, aligned closing.
Decorative knobs and pulls for residential and hospitality furniture – brass or aluminum, polished or PVD coated, matching your exact profile.
Adjustable table legs and brackets – threaded inserts and pivot points machined in one setup for consistent height adjustment.
Locking mechanisms for office desks and storage units – small precision parts with tight tolerances on cam slots and spring seats.
Soft-close damper housings – CNC machined aluminum bodies that hold hydraulic cartridges without leakage.
Motorized lift hinges for TV lift cabinets – combined with our heatsink line for thermal management of the drive motor.
These parts are custom CNC machining, made in China, with no MOQ – so you can prototype a single hinge, test it, then scale to full production without re-quoting.
Q: What is your MOQ?
A: No MOQ. We machine one piece for prototypes and ramp to 50,000+ for production. The unit price drops with volume, but you are never forced to over-order.
Q: How do you guarantee tolerance and quality?
A: We hold ±0.01 mm on critical features. Every batch gets a first article inspection, in-process checks, and a final CMM report. If you request it, we add a full dimensional report per part.
Q: What is your lead time?
A: Prototypes ship in 7–12 working days. Production runs take 15–20 working days after drawing approval. Rush service is available for urgent samples – call us to check current capacity.
Q: Can you provide material certificates?
A: Yes. Every batch comes with a material mill certificate. We also provide RoHS and REACH compliance documents on request. For aerospace or medical-grade alloys, we source from approved mills only.
Send Your Drawing
Stop sourcing from three different suppliers. Send us your hinge or knob drawing, and get a firm quote in 12 hours.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Attach your PDF, STEP, or IGES file. Include material, finish, and quantity. We reply with a fixed price, lead time, and DFM feedback if we see a way to cut cost. No obligation, no pressure – just engineering.
