## Opening Your jewelry design deserves a clasp that closes clean, aligns perfectly, and lasts through years of wear. We machine each clasp and hook directly from your 3D drawing
Precision CNC Machined Jewelry Clasps & Hooks | Custom Made in China
## Opening Your jewelry design deserves a clasp that closes clean, aligns perfectly, and lasts through years of wear. We machine each clasp and hook directly from your 3D drawing or sample. No stock
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your jewelry design deserves a clasp that closes clean, aligns perfectly, and lasts through years of wear. We machine each clasp and hook directly from your 3D drawing or sample. No stock parts, no compromises. Every piece is verified against your file before shipment.
Tolerance: ±0.01 mm on critical mating surfaces
Lead time: 7–10 working days for prototypes, 15–20 days for production
5-axis CNC milling, CNC turning, wire EDM for internal contours
Tolerance
±0.01 mm (mating surfaces), ±0.05 mm (general)
Surface finish
As-machined Ra 0.4 µm, mirror polish Ra 0.05 µm, bead blast, PVD coating
Minimum order
No MOQ—single-piece prototyping supported
Batch size
1–50,000 pieces per order
Inspection
100% dimensional check on critical features, CMM report per batch
Lead time
Prototype: 7–10 days; Production: 15–20 days (after drawing approval)
Certifications
Material mill certs, RoHS, REACH compliance
We use 5-axis CNC machines for complex undercuts and spring-loaded hook mechanisms. For high-volume runs, we combine CNC machining with secondary stamping to reduce cost per piece. All parts are deburred and tumbled before final inspection.
Three Reasons Buyers Send Us Their Drawings
1. Batch-traceable quality.
Every batch gets a unique lot number. We record machine parameters, tool wear, and operator ID for each run. If a defect appears in the field, we trace it back to the exact shift and machine. You get a full traceability report with every shipment.
2. Inspection report per batch.
We do not ship without data. Each batch includes a dimensional report with CMM measurements, surface roughness readings, and material hardness verification. You can check the numbers against your drawing before we pack the parts. No surprises at your incoming QC.
3. One factory for CNC + stamping + spring + heat sink.
Your clasp may need a stamped spring plate, a coiled torque spring, or a heat-treated pin. We do all of it under one roof. No multi-vendor coordination, no tolerance stack-up between suppliers. Send us the assembly drawing—we handle the rest.
Where These Parts Are Used
CNC machined clasps and hooks are not just for necklaces. Real applications include:
Luxury watch bracelets—folding clasps with micro-adjustable links, machined from solid 316L.
Medical alert jewelry—titanium hooks that must resist corrosion and repeated autoclaving.
High-end handbag hardware—rotating hooks and magnetic clasps with tight press-fit tolerances.
Industrial lanyards—safety hooks with spring-loaded gates, tested to 50,000 cycles.
Custom orthodontic retainers—small precision hooks machined from biocompatible titanium.
In every case, the part must open and close smoothly thousands of times. That requires exact geometry, not just a pretty surface. Our CNC process holds the critical angles and radii that make the mechanism feel solid.
Q: What is your MOQ?
A: No MOQ. We machine a single prototype for your evaluation, then scale to any quantity. Tooling cost is amortized only if you order over 500 pieces.
Q: How do you guarantee tolerance and quality?
A: We use a 3D model for programming, not a 2D sketch. First article is inspected 100% on a CMM. Production batches are sampled at AQL 0.65, and we send the full inspection report with each shipment.
Q: What is the lead time for a custom clasp?
A: Prototype in 7–10 working days after drawing approval. Production orders ship in 15–20 days. Urgent orders can be expedited for a 30% surcharge.
Q: Can you provide material certificates?
A: Yes. We supply mill test certificates for all raw material, including chemical composition and mechanical properties. For gold-plated parts, we provide plating thickness reports.
Send Your Drawing
Send us your 3D file (STEP, IGES, or X_T) or a sample part. We will review manufacturability and send a firm quote within 12 hours.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Custom CNC machining, made in China, with no MOQ and full traceability. Your design, our machines, verified before shipment.
