OpeningYour motorcycle design deserves better than off-the-shelf castings. Send us your 3D model or 2D drawing. We machine it to your exact specification. Every part is verified ag
Custom CNC Machined Motorcycle Parts | Precision Manufacturing No MOQ
OpeningYour motorcycle design deserves better than off-the-shelf castings. Send us your 3D model or 2D drawing. We machine it to your exact specification. Every part is verified against your drawing b
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your motorcycle design deserves better than off-the-shelf castings. Send us your 3D model or 2D drawing. We machine it to your exact specification. Every part is verified against your drawing before shipment. No surprises. No tolerance guesswork.
We are a precision manufacturing factory in Dongguan, China. 20 years of CNC machining experience. We build parts for racing teams, electric bike startups, and aftermarket brands worldwide.
Tolerance: ±0.01 mm (ISO 2768-fine or tighter on request)
Lead time: 7–15 days for standard CNC parts
No MOQ: 1 piece prototype to 10,000+ production runs
3-axis CNC mills, 4-axis CNC mills, 5-axis CNC mills, CNC lathes (Swiss-type for small diameters)
Processes
Milling, turning, drilling, tapping, thread milling, wire EDM (on request)
Tolerance
Standard ±0.05 mm, Precision ±0.01 mm, Concentricity ≤0.02 mm
Surface Finish
Ra 0.8 µm (machined), Ra 0.4 µm (ground/polished)
Finishing
Clear or black anodize (Type II/III), hard anodize, powder coat, zinc plating, passivation, bead blasting
Batch Size
1 piece (prototype) to 50,000 pieces (production)
Quality Control
First article inspection (FAI), in-process checks every 2 hours, final inspection with CMM and calipers
Documentation
Material certificates (EN 10204 3.1), dimensional inspection report, heat treatment certificates
Three Reasons Buyers Send Us Their Drawings
1. Batch-traceable quality
Every batch gets a unique job number. We track material lot, machine operator, and tooling used. If a defect appears in the field, we trace it back to the exact batch and hour of production. You get full traceability from raw billet to finished part.
2. Inspection report per batch
You do not have to trust our word. Each shipment includes a dimensional inspection report. We measure critical features with a CMM (coordinate measuring machine) and record actual values. For tight tolerances, we provide a full FAI with pass/fail data per dimension. This saves your incoming QC team hours of work.
3. One factory for CNC + stamping + springs + heat sinks
Most motorcycle parts are not just one machined piece. You need brackets, heat sinks, springs, and stamped plates. We run all four lines under one roof. No separate vendors. No shipping delays between suppliers. One purchase order, one quality standard, one responsible party. This cuts your lead time by 30–40% on multi-process assemblies.
Where These Parts Are Used
Our CNC machined motorcycle parts go into real, demanding applications:
Brake system components – caliper brackets, master cylinder adapters, banjo bolts. Machined from 7075-T6 for fatigue resistance.
Engine covers and cases – clutch covers, stator covers, cam chain tensioner blocks. CNC machining gives a clean OEM+ look.
Handlebar and controls – levers, bar clamps, throttle housings. We hold ±0.02 mm on pivot holes for smooth action.
Exhaust hangers and brackets – stainless steel or titanium for heat resistance and vibration strength.
Electric motorcycle frames – motor mounts, battery box brackets, swingarm pivots. We machine to your exact geometry for EV conversions.
Custom racing parts – one-off sprocket carriers, steering dampers, footpeg rearsets. No MOQ means you can test a single prototype before committing to a run.
Q: What is your MOQ?
A: No MOQ. We machine 1 piece for prototyping. For production, we offer tiered pricing—the more you order, the lower the unit cost. Most buyers start with 5–10 pieces for testing, then scale to 500–5,000 for production.
Q: How do you guarantee tolerance and quality?
A: We machine to your drawing, not to our interpretation. Our QC team checks every critical dimension. For tolerances tighter than ±0.01 mm, we use a CMM and provide a full inspection report. If a part fails, we re-machine it at no cost to you.
Q: What is the lead time for custom CNC machining?
A: Prototype (1–5 pieces): 7–10 days. Production (50+ pieces): 12–15 days. Add 2–3 days for anodizing or powder coating. We ship via DHL, FedEx, or UPS—door to door from our factory in Dongguan.
Q: Do you provide material certificates?
A: Yes. Every batch comes with a material certificate (EN 10204 3.1) from the mill. We also provide heat treatment certificates and RoHS/REACH compliance documents on request. This is standard for our automotive and aerospace clients.
Send Your Drawing
Stop waiting for quotes from middlemen. Talk directly to the factory that machines your parts.
Send us your 3D model (STEP, IGES, X_T) or 2D PDF. We respond with a firm quote in 12 hours—including unit price, lead time, and suggested material if you are unsure.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Precision manufacturing, made in China, with no MOQ. Your drawing is safe with us—we sign NDAs on request. Let us show you what a 20-year-old CNC factory can do for your motorcycle.
