Precision Fine Blanking Parts | Custom Metal Stamping No MOQ
## Opening Your drawing is the starting point. We turn it into a finished fine blanking part with clean sheared edges and tight dimensional control. Every piece is verified before shipment. No guess
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing is the starting point. We turn it into a finished fine blanking part with clean sheared edges and tight dimensional control. Every piece is verified before shipment. No guesswork, no surprises.
We are BQUQ, a precision manufacturing factory in Dongguan, China. Our metal stamping line has run for 20 years. We specialize in fine blanking—a process that delivers a smoother edge and better flatness than conventional stamping.
Tolerance: ±0.01 mm on critical features
Lead time: 7–15 days for prototypes, 15–25 days for production
No MOQ: order 1 piece or 100,000 pieces
Material thickness: 0.1 mm to 6.0 mm
Inspection: 100% critical dimension check, CMM report included
Three reasons buyers send us their drawings
1. Batch-traceable quality.
Every lot gets a unique batch number. We record material heat number, machine settings, and operator ID. If a problem appears in your assembly line, we trace it back to the exact run in minutes. No fishing through paperwork.
2. Inspection report per batch.
You get a full inspection report with every shipment. It includes dimensional measurements, surface finish values, and material hardness data. We use CMM, optical projectors, and surface roughness testers. The report matches your drawing, point by point.
3. One factory for CNC + stamping + spring + heatsink.
Your fine blanking part often needs a spring, a machined housing, or a heatsink. We do all four in-house. No outsourcing, no shipping delays between vendors. You send one drawing package, we deliver a complete assembly-ready part. This cuts your supplier management time in half.
Where these parts are used
Fine blanking parts go where precision and reliability are non-negotiable.
Automotive: seat belt components, brake system levers, gear shift plates, fuel injector brackets.
In each case, the part must hold tolerance after thousands of cycles. Fine blanking gives you that consistency. Our customers often move from prototypes to annual contracts once they see the edge quality and repeatability.
Questions buyers ask before ordering
Q: What is your MOQ?
A: No MOQ. We run single-piece prototypes and million-piece production orders on the same line. Start with one sample, scale up when you are ready.
Q: How do you guarantee tolerance and quality?
A: We use fine blanking presses with precision guides, then verify with CMM. Critical dimensions are checked 100%. Our standard tolerance is ±0.01 mm, and we hold tighter on request. Every batch ships with a dimensional report.
Q: What is your lead time for custom metal stamping?
A: Prototypes take 7 days after drawing approval. Production runs take 15–25 days, depending on quantity and secondary operations. We quote exact dates with your order confirmation.
Q: Can you provide material certificates?
A: Yes. We supply mill certificates for all raw materials, plus our own incoming inspection records. For medical or automotive, we add full traceability documentation at no extra cost.
Send your drawing
We respond to every inquiry with a firm quote in 12 hours. Send your drawing, material spec, and quantity. We will confirm feasibility, tolerance, and price—no vague estimates.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Precision manufacturing, made in China, with no MOQ and full traceability. Your drawing is the only thing we need to start.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.