Precision CNC Machined Rack and Pinion Gears | Custom Tolerances
OpeningYour drawing. Our machines. Verified results.We machine rack and pinion gears exactly to your print. Every tooth profile is cut, measured, and documented before the crate leaves our floor. You
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
We machine rack and pinion gears exactly to your print. Every tooth profile is cut, measured, and documented before the crate leaves our floor. You get parts that mesh correctly on the first try, not after three revisions.
Tolerance: ±0.005 mm on tooth profile, ±0.01 mm on bore and mounting faces
Lead time: 10–15 working days for standard steel grades
No MOQ: one piece or ten thousand, same process control
Inspection: full CMM report included with every batch
We are a precision manufacturing shop in Dongguan, China. Twenty years of cutting teeth, stamping brackets, and forming springs. Your rack and pinion set is machined on the same lines that feed automotive and robotics OEMs.
CMM (Zeiss), gear tester (Klingelnberg), hardness tester, material certs
Lead time
10 days for prototype, 15 days for production runs
All gear blanks are stress-relieved before cutting. We rough and finish in separate setups to avoid thermal drift. For hardened racks, we grind after heat treat to hold the profile tolerance.
Three reasons buyers send us their drawings
1. Batch-traceable quality.
Every bar of steel is tagged with a heat number. Every machined gear gets a serial number laser-marked on a non-functional face. If a problem shows up in your assembly line, we trace it back to the exact batch, machine, and operator within one hour. No guesswork.
2. Inspection report per batch.
You do not have to trust us. We send a full inspection report with each shipment: CMM data for tooth profile, lead, and pitch, plus material certificates and hardness readings. If you need a PPAP Level 3, we do that too. The report is signed by our QC manager, not a robot.
3. One factory for CNC + stamping + spring + heatsink.
Your rack and pinion gear rarely ships alone. It goes into an assembly with a stamped housing, a spring return, and a heatsink. We make all four in one building. One purchase order, one logistics point, one quality standard. You save freight, time, and vendor management headaches. This is custom CNC machining without the usual multi-vendor chaos.
Where these parts are used
Rack and pinion sets from our shop go into:
Steering systems for electric forklifts and small utility vehicles
Linear actuators in packaging machines, converting lines, and printing presses
Robotic arms for precise rotary-to-linear motion in pick-and-place cells
Medical bed lifts and surgical table positioning mechanisms
Solar tracker drives that tilt panels to follow the sun
Machine tool feed axes where backlash must be under 0.02 mm
If your application needs smooth motion, repeatable positioning, or high load capacity, our gears handle it. We have cut teeth for a 2-meter-long rack used in a gantry robot and a pinion the size of a coin for a dental drill. Both passed the same inspection standard.
Q: Do you really have no MOQ?
A: Yes. We machine one-off prototypes for testing and full production runs for assembly lines. The setup cost is the same, so a single piece costs more per unit, but we do not force you to buy fifty pieces you do not need.
Q: What tolerance can you hold on a rack and pinion?
A: Standard is ±0.01 mm on pitch and bore. For ground gears, we hold ±0.005 mm on tooth profile. We measure every part with a CMM and a gear tester. If your print specifies a tighter class, we quote it after reviewing the geometry.
Q: What is your typical lead time?
A: 10 working days for prototypes in common steel grades. 15 working days for production batches up to 5,000 pieces. Heat treatment adds 3–5 days. We ship from Dongguan via air or sea, depending on your urgency.
Q: Do you provide material certificates?
A: Yes. Every batch comes with a mill certificate for the raw material, a heat treatment report, and a dimensional inspection report. For aerospace or medical work, we add full traceability documentation at no extra cost.
Send your drawing
Stop guessing if a factory can hold your tolerance. Send us your PDF or STEP file. We reply with a firm quote in 12 hours.
Email: sc@bquq.com
WhatsApp: +86 13713157787
We are a precision manufacturing partner in China, not a middleman. Your rack and pinion gears are machined, inspected, and shipped from our own floor. No MOQ, no surprises. Send the drawing today.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.