Custom CNC Machined Vacuum Pump Parts | Precision Manufacturing China
Your vacuum pump design, machined to print. We cut, mill, and turn parts from bar stock or billet, then verify every critical dimension before the crate leaves our floor. No surprises at
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your vacuum pump design, machined to print. We cut, mill, and turn parts from bar stock or billet, then verify every critical dimension before the crate leaves our floor. No surprises at incoming inspection.
We are BQUQ, a precision manufacturing factory in Dongguan, China. Twenty years of CNC work for pumps, compressors, and fluid handling systems.
Tolerance: ±0.005 mm on machined features
Lead time: 7–15 days for prototypes, 15–25 days for production runs
No MOQ: one piece or ten thousand, same process control
Standard ±0.01 mm, precision ±0.005 mm, concentricity ≤0.01 mm
Surface finish
Ra 0.4 µm on sealing faces, Ra 0.8 µm general, bead blast or anodize optional
Threads
Metric, UNF, UNC, NPT, BSPP – cut or rolled
Batch size
1–100,000 pieces, no MOQ
Inspection
First article (FAI) per batch, CMM, profilometer, go/no-go gauges
Certifications
ISO 9001:2015, material certs (EN 10204 3.1) on request
T
hree reasons buyers send us their drawings 1. Batch-traceable quality. Every part gets a unique job number. Raw material lot, machine operator, tool offsets, and inspection data are linked to that number. If a problem shows up in your assembly line, we trace it to the exact batch and hour it was made. No guesswork.
2. Inspection report per batch. You do not have to trust our word. Each shipment includes a dimensional report with measured values for all critical features. For tight-tolerance bores and mating faces, we include CMM point clouds. Your IQC can match our numbers against their own readings in minutes.
3. One factory for CNC, stamping, springs, and heat sinks. Your vacuum pump housing might need CNC-machined pockets, a stamped valve plate, a spring-loaded check valve, and a heat sink for the motor drive. We run all four lines under one roof. That means one purchase order, one logistics point, one quality system. Fewer suppliers, fewer delays, lower total cost.
W
here these parts are used Custom CNC machining for vacuum pumps covers a wide range of components. We make:
Rotary vane pump end plates – flatness held to 0.005 mm to prevent air leakage
Scroll compressor housings – 5-axis machined scroll profiles with 0.01 mm wall consistency
Diaphragm pump valve seats – stainless or brass, with NPT threads for manifold mounting
Turbomolecular pump stators – precision bored stages, concentric to the rotor axis
Liquid ring pump impellers – complex curved vanes, balanced to G2.5 per ISO 1940
Vacuum chamber feedthroughs – KF and CF flanges, machined from 316L with knife-edge finish
These parts go into semiconductor tools, medical suction devices, food packaging lines, and automotive brake boosters. If your pump moves air or gas, we can machine the critical bits.
Q
uestions buyers ask before ordering Q: Do you really have no MOQ? A: Yes. We run a single prototype at the same machine and tolerance as a 5,000-piece order. The only difference is setup cost per piece. For low quantities, you pay for machine time, not for a minimum order policy.
Q: How do you control tolerance on thin-walled pump parts? A: We use stress-relieved bar stock and multi-step machining. Rough cut, then let the part rest, then finish cut. For bores under 20 mm, we ream instead of mill to hold ±0.005 mm. Every critical dimension goes on the CMM report.
Q: What is your realistic lead time for a production batch? A: Prototypes ship in 7–15 days after drawing approval. Production runs of 500–5,000 pieces typically take 15–25 days. We quote exact dates per job, not generic promises. Rush service is available for breakdown situations.
Q: Can you provide material certificates for aerospace or medical specs? A: Yes. We source from certified mills and can supply EN 10204 3.1 certificates for metals, plus FDA-compliant grades for plastics. For special alloys like Inconel or titanium, we confirm availability before quoting.
S
end your drawing Email your PDF or STEP file to sc@bquq.com. Include your target quantity, material, and required tolerance. We reply with a firm quote in 12 hours – not an estimate, a fixed price with lead time.
Prefer chat? WhatsApp +86 13713157787 for a quick technical review. We speak engineer.
Custom CNC machining, made in China, with no MOQ and full traceability. Send the drawing, we handle the rest.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.