BQUQ CNC Machined ER Collet Chuck Tool Kit with Milling Drill Tools
This is a complete CNC machined ER collet chuck tool kit with milling drill tools, built for shops that need tool holding accuracy without paying a premium. The chuck body is machined from 42CrMo stee
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
This is a complete CNC machined ER collet chuck tool kit with milling drill tools, built for shops that need tool holding accuracy without paying a premium. The chuck body is machined from 42CrMo steel, hardened to HRC 58-62, with a guaranteed TIR (runout) of 0.005 mm at the nose. We ship standard ER20 and ER32 kits in 10 days, and because we are a precision manufacturing factory in Dongguan, China, you get the same quality as German or Japanese holders at 30-40% lower cost.
How ER Collet Chucks Grip Tooling Without Runout
ER collet chucks use a tapered collet that compresses evenly around the tool shank when you tighten the lock nut. The key is the 8° cone angle inside the chuck body — if that angle is off by even 0.1°, you get uneven grip and runout. We grind the taper in-house on a Studer S41, holding the angle to ±0.002 mm. That is why our TIR stays at 0.005 mm, not the 0.015 mm you see from cheaper suppliers. The kit includes precision ER collets in 1 mm increments, so your milling drill tools seat dead-center every time.
Materials and Heat Treatment We Use
Our chuck body starts as 42CrMo alloy steel — the same grade used in automotive drivetrain gears. We pre-machine, then vacuum harden to HRC 58-62, not the HRC 48-52 you find in import holders. After hardening, we temper once to relieve stress, then precision grind the bore and taper. The lock nut is 20CrMnTi case-hardened to HRC 60 ± 2, with a bearing surface that is lapped to Ra 0.4 µm. You will not see scale, decarb, or soft spots because we control the furnace atmosphere with carbon potential sensors.
Tool Kit Contents: What Exactly You Get
This is a ready-to-run kit, not just a single chuck. You get: 1 ER collet chuck body (choose ER20 or ER32), 10 precision collets in sizes 1-10 mm (ER20) or 2-20 mm (ER32), 1 hardened lock nut with spanner holes, 1 C-spanner wrench, and 1 draw bar if you order the BT40 or BT30 shank version. For milling drill tools, we also include a set of 3 ER collet wrenches (torque-rated) and a cleaning brush. Every collet is individually measured for TIR before packing — we reject anything above 0.005 mm.
Inspection Before Every Shipment
We do not do batch sampling. Every single CNC machined ER collet chuck tool kit with milling drill tools goes through a 3-stage inspection. First, a CMM (Zeiss Contura) checks the taper angle, bore diameter, and concentricity. Second, a runout gauge checks TIR at 3 positions: collet nose, 10 mm from nose, and 50 mm from nose. Third, we torque-test the lock nut to 50 Nm and verify the collet closes without sticking. You get a signed inspection report with each order, including the measured TIR value — not a generic "passed" sticker.
Parameter
Value
Material (chuck body)
42CrMo alloy steel
Hardness (chuck body)
HRC 58-62
Hardness (lock nut)
HRC 60 ± 2 (20CrMnTi)
TIR (runout) at nose
0.005 mm max
Taper angle accuracy
±0.002 mm (8° cone)
Surface finish (taper bore)
Ra 0.4 µm
Collet sizes (ER20 kit)
1-10 mm (10 pcs)
Collet sizes (ER32 kit)
2-20 mm (10 pcs)
Shank options
BT30, BT40, BT50, HSK63, straight shank
Lead time
10 days (standard kits), 15 days (custom shank)
MOQ
No MOQ — order 1 kit or 100
Inspection report
Included with every shipment
Why Our TIR Beats Standard ER Chuck Specs
Most ER chucks advertise 0.010-0.015 mm TIR. That is because they grind the taper in a separate operation and then bolt the nose on, introducing stack-up error. We machine the taper and the bore in one clamping operation on a 5-axis Mazak, so there is zero re-clamping error. The result is 0.005 mm TIR, which directly improves your milling drill tools' surface finish and tool life. If you are doing finishing passes in aluminum or steel, you will see the difference in the first part — no chatter marks, no rework. For a deeper look at tool selection, read our CNC cutting tool selection guide.
Custom Shank Options for Your Machine Spindle
We stock BT30, BT40, BT50, HSK63, and straight shank versions. If your spindle uses Capto or a proprietary taper, send us your drawing and we will machine the shank to match — no extra tooling charge for the first 10 units. The kit is a precision manufacturing product made in China, but we do not cut corners on the shank: it is ground to AT3 grade (ISO 1947), which means a taper error of less than 0.005 mm over the full gauge length. For custom lengths, we can extend the shank up to 150 mm without affecting TIR.
Packing and Shipping for CNC Shops
Each kit ships in a foam-lined steel case that protects the collets and chuck from impact. We use anti-rust VCI paper inside the case, so the parts arrive clean and ready to mount — no need to degrease before first use. For international orders, we ship via DHL or FedEx (2-5 days) or by sea freight (15-25 days) if you are ordering in volume. The case is 320 x 220 x 120 mm and weighs 3.8 kg (ER20 kit) or 5.2 kg (ER32 kit), so shipping cost is predictable. We mark the package as "precision tooling" with a low-value commercial invoice to avoid customs delays.
What is your minimum order quantity?
No MOQ — you can order a single CNC machined ER collet chuck tool kit with milling drill tools as a trial, and we will still give you the same inspection report and packaging as a bulk order.
Can you customize the collet range or shank size?
Yes, we can change the collet sizes (e.g., all metric or all imperial) and machine any shank taper, length, or pull stud configuration — just send your drawing and we will quote within 12 hours.
How do you control quality on custom orders?
For custom kits, we produce a first article and send you a CMM report and photos before mass production; if the first article does not pass your tolerance, we remake it at no cost — see our CNC machining tolerances guide for what we can hold.
What is the standard lead time for this kit?
Standard ER20 and ER32 kits ship in 10 days; custom shank or custom collet ranges take 15 days because we need to source the raw material and program the grind cycle.
Get a firm quote within 12 hours. Send your drawing or just your spindle type and collet range — we will reply with pricing, lead time, and a technical drawing of the chuck. Email sc@bquq.com or WhatsApp +86 13713157787. No MOQ, no design fee for standard kits, and we ship worldwide from our Dongguan factory.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.