OpeningYour drawing defines the part. Our job is to make it exactly that way, then prove it before shipment.We machine pin fin heat sinks from solid aluminum or copper blocks. No casting porosity. No
Get a quote
-
English
- sc@bquq.com
OpeningYour drawing defines the part. Our job is to make it exactly that way, then prove it before shipment.We machine pin fin heat sinks from solid aluminum or copper blocks. No casting porosity. No
Your drawing defines the part. Our job is to make it exactly that way, then prove it before shipment.
We machine pin fin heat sinks from solid aluminum or copper blocks. No casting porosity. No stamped fin gaps. Just precise, repeatable geometry for thermal performance you can calculate and trust.
At a glance: ±0.01 mm machining tolerance on critical features, 10-15 day lead time for prototypes, no MOQ for custom heat sinks, 100% inspection report with every batch.
| Parameter | Value |
|---|---|
| Materials | Aluminum 6061-T6, 6063-T5, 5052; Copper C1100, C1020 |
| Process | 3-axis & 4-axis CNC milling, CNC turning, skiving (optional) |
| Tolerance | ±0.01 mm on fin pitch and height; ±0.02 mm on overall dimensions |
| Surface finish | Ra 1.6 µm as machined; optional anodize (black, clear), nickel plating, passivation |
| Fin thickness | 0.8 mm minimum (aluminum), 0.6 mm minimum (copper) |
| Fin height | Up to 80 mm, aspect ratio up to 15:1 |
| Base thickness | 2 mm to 30 mm |
| Max part size | 600 mm x 400 mm x 150 mm |
| Batch size | 1 piece to 100,000+ pieces |
| Lead time | 10-15 days for prototypes; 20-30 days for production runs |
| Quality | CMM inspection, 100% dimensional check per batch, material certs included |
1. Batch-traceable quality. Every batch gets a unique lot number. We record material heat numbers, machine parameters, and inspection results against that lot. If a problem appears in your assembly line, you can trace it back to the exact batch and date. No guesswork.
2. Inspection report per batch. You get a dimensional report with every shipment. Critical features are measured with CMM equipment and compared directly to your drawing tolerances. We do not ship parts without this report. You do not need to re-inspect everything on arrival.
3. One factory for CNC, stamping, springs, and heat sinks. Your assembly may need a machined heatsink, a stamped clip, and a compression spring. We make all three under one roof. That means one purchase order, one quality system, one shipping date. Fewer suppliers, less coordination risk, faster time to market.
Pin fin heat sinks from our shop go into power electronics, LED lighting modules, IGBT cooling assemblies, and high-frequency communication equipment. We also machine heat sinks for medical laser systems, industrial motor drives, and EV battery thermal management units.
The pin fin geometry is preferred when airflow is limited or when you need the same cooling performance in a smaller footprint compared to straight fin designs. Our customers use them in sealed enclosures, forced convection systems, and natural convection applications where space is tight.
We also produce heat sinks for custom test fixtures and prototype validation. Many engineers send us a drawing for a one-off part to verify thermal simulation results before committing to a production design.
Looking for a different part? We also machine Custom Industrial Heat Sinks Precision Manufacturing No MOQ China in the same Dongguan factory.
Q: Is there really no MOQ? A: Yes, no MOQ. We machine one piece for prototype validation or 100,000 pieces for production. The unit price scales with quantity, but we do not turn away small orders. Many customers start with a 1-5 piece sample run, test it, then release a production order.
Q: What tolerance and quality can you guarantee? A: Standard machining tolerance is ±0.01 mm on fin pitch and height. Overall dimensions hold ±0.02 mm. Every batch ships with a CMM inspection report. If we miss a dimension, we re-machine or refund at your choice.
Q: What is the typical lead time? A: Prototypes ship in 10-15 days after drawing approval. Production runs of 1,000-10,000 pieces take 20-30 days. For urgent needs, we can expedite prototypes to 7 days. We confirm exact lead time with your order confirmation.
Q: Do you provide material certificates and compliance documents? A: Yes. Every shipment includes mill test certificates for the raw material. We also provide RoHS and REACH compliance documentation on request. For aerospace or medical applications, we can supply full traceability documentation per batch.
Send us your 2D or 3D drawing in STEP, IGES, or PDF format. We review it for manufacturability, confirm material and finish options, and return a firm quote within 12 hours.
Email: sc@bquq.com WhatsApp: +86 13713157787
Precision manufacturing is our standard. Custom heat sinks made in China, with no MOQ and verified quality. Send your drawing today.
| Parameter | Capability |
|---|---|
| Materials | AL6063/6061/5052, pure copper C1100, copper-aluminum composite |
| Process | Extrusion, CNC machining, skiving, forging, die casting, stamping fins |
| Fin Types | Extruded, pin fin, skived, folded, bonded, heat pipe, vapor chamber |
| Surface | Black anodizing, clear anodizing, nickel plating, powder coating |
| Size Range | Max 1500 x 400 x 300 mm |
| Thermal Test | Thermal resistance and heat dissipation data per batch |
| Prototype | 5-7 days, no MOQ on samples |
| Inspection | CMM, thermal resistance tester, full report per batch |
