OpeningYour AI liquid cooling manifold design is only as good as the stamped parts inside it. We make those parts to your drawing, verify every critical dimension before shipment,
Precision AI Liquid Cooling Manifold Stamping Parts | Custom Metal Stamping China
OpeningYour AI liquid cooling manifold design is only as good as the stamped parts inside it. We make those parts to your drawing, verify every critical dimension before shipment, and ship within 15 d
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your AI liquid cooling manifold design is only as good as the stamped parts inside it. We make those parts to your drawing, verify every critical dimension before shipment, and ship within 15 days.
Tolerance: ±0.05 mm on critical features
Lead time: 10–15 working days for prototypes
No MOQ: one piece or one million, same process control
Secondary ops: CNC finishing, surface plating, spring assembly
We are a precision manufacturing factory in Dongguan, China, with 20 years in metal stamping. You send the drawing. We handle the rest.
Specifications
Parameter
Value
Materials
C1100 copper, C17200 beryllium copper, Al 6061-T6, SUS304, 65Mn spring steel
Stamping machines
25-ton to 250-ton high-speed presses (30–800 SPM)
Process capability
Progressive die, deep drawing, coining, embossing, bending, punching
Tolerance
±0.05 mm on formed features, ±0.02 mm on stamped holes
Surface finish
As-stamped, electropolished, nickel-plated, anodized (black or clear)
Burr control
≤0.05 mm, deburred and tumbled on request
Batch size
No MOQ – sample to high-volume production
Inspection
CMM, optical comparator, 100% critical dimension check per batch
Certifications
ISO 9001:2015, material certificates (EN 10204 3.1)
Lead time
10 days for samples, 15 days for production runs
We use progressive dies for high-volume consistency. For complex manifold plates with multiple ports, we combine stamping with CNC drilling and tapping in-house. No outsourcing, no tolerance drift.
Three Reasons Buyers Send Us Their Drawings
1. Batch-traceable quality.
Every stamped lot gets a unique batch number. That number links to material heat number, die wear log, and inspection records. If a field failure happens, you trace it back to the exact coil of metal. We keep records for 10 years.
2. Inspection report per batch.
You get a full dimensional report with every shipment. We measure the critical features you mark on the drawing—hole positions, flatness, bend angles. The report is signed by our QC engineer, not a machine. If a dimension is out, we re-run the batch before shipping.
3. One factory for stamping, CNC, springs, and heat sinks.
Your manifold is not just stamped plates. It has threaded inserts, compression springs, and sometimes a bonded heat sink. We do all of that under one roof. You avoid the logistics nightmare of coordinating three suppliers in three time zones. One drawing, one PO, one invoice.
Where These Parts Are Used
These stamped manifold parts go into liquid cooling systems for:
AI server racks – cold plates with stamped flow channels and mounting brackets
High-performance GPU clusters – copper manifold plates with precision port alignment
EV battery thermal management – aluminum stamped manifolds with integrated spring clips
Telecom base stations – stainless steel manifold covers with EMI shielding tabs
Medical laser cooling – small brass stamped manifolds with tight flatness requirements
In each case, the stamped part must hold fluid pressure, resist corrosion, and mate with O-rings or gaskets. Our stamping tolerances make that seal possible.
Q: Do you really have no MOQ?
A: Yes. We run sample quantities of 1–10 pieces for fit testing. Production pricing kicks in at 500+ pieces, but you are never forced to order more than you need.
Q: How do you guarantee ±0.05 mm tolerance on stamped parts?
A: We design the progressive die with compensation for springback, then validate with a first-article inspection. During production, we check every 50th piece on a CMM. If drift appears, we stop the press and adjust.
Q: What is your lead time for a custom manifold part?
A: Tooling (die) takes 7–10 days for simple parts, 15 days for complex progressive dies. Sample parts ship 3 days after tooling approval. Production runs ship 10–15 days after sample sign-off.
Q: Can you provide material certificates?
A: Yes. We supply EN 10204 3.1 mill certificates for copper, aluminum, and stainless steel. For aerospace or medical grades, we can source with full traceability at a small premium.
Send Your Drawing
Stop waiting for quotes from factories that cannot hold your tolerances. Send us your PDF or STEP file today.
Firm quote in 12 hours
Design-for-manufacturing feedback free of charge
No MOQ, no hidden tooling fees
Email: sc@bquq.com
WhatsApp: +86 13713157787
We are a custom metal stamping factory made in China, but our quality system is built for global OEMs. Your drawing deserves a precise answer. Send it now.
