OpeningSend us your drawing. We machine the bracket exactly to your print. Every part is verified before shipment. No guesswork. No surprises.Tolerance: ±0.005 mm (0.0002 in) on critical featuresLead
Get a quote
-
English
- sc@bquq.com
OpeningSend us your drawing. We machine the bracket exactly to your print. Every part is verified before shipment. No guesswork. No surprises.Tolerance: ±0.005 mm (0.0002 in) on critical featuresLead
Send us your drawing. We machine the bracket exactly to your print. Every part is verified before shipment. No guesswork. No surprises.
| Parameter | Value |
|---|---|
| Materials | Aluminum 6061-T6, 7075-T6; Stainless 304/316; Titanium Grade 5 |
| Machines | 3-axis & 5-axis CNC mills, CNC lathes with live tooling |
| Tolerance | ±0.005 mm standard; ±0.002 mm on request |
| Surface finish | Ra 0.8 µm as machined; anodizing, alodine, passivation available |
| Max part size | 800 mm x 600 mm x 400 mm (31.5" x 23.6" x 15.7") |
| Batch size | 1 – 50,000+ pieces |
| Inspection | CMM, optical comparator, surface roughness tester |
| Certifications | ISO 9001:2015, material certs (EN 10204 3.1) |
| Lead time | Prototype 5 days, production 10–15 days |
We hold tight tolerances on thin walls and complex 5-axis geometry. Our machinists have 20 years of average experience. We use new tooling for every critical dimension.
1. Batch-traceable quality. Each batch gets a unique job number. Material heat numbers are recorded. Tool paths are archived. If you need to trace a part back to its raw bar stock, we can do it in minutes.
2. Inspection report per batch. You get a full dimensional report with every shipment. CMM data on all critical features. Surface finish readings. Material certs. No extra charge. No asking – it’s automatic.
3. One factory for CNC + stamping + springs + heat sinks. Your aircraft bracket might need a stamped cover, a spring clip, or a heat sink bonded to it. We do all four processes under one roof. You save shipping costs, lead time, and vendor management headaches. One PO, one invoice, one responsible party.
Our CNC machined aircraft brackets go into real flying machines. Common applications:
We also machine brackets for ground support equipment, helicopter cargo hooks, and missile guidance housings. If it flies, we’ve likely machined a bracket for it.
Looking for a different part? We also machine Custom CNC Machined Robot End Effectors | Precision Manufacturing China in the same Dongguan factory.
Q: What is your MOQ? A: No MOQ. We run one-piece prototypes and 50,000-piece production runs with the same quality system. Prototype pricing is slightly higher per piece to cover setup, but tooling is yours to keep.
Q: How do you guarantee tolerance and quality? A: We use in-process probing on the machine. Every critical dimension is verified on a CMM after machining. We send you the inspection report with the shipment. If any dimension is out of spec, we re-machine or refund – your choice.
Q: What is your lead time for custom CNC machining? A: Standard aluminum brackets ship in 7–10 days. Titanium or stainless takes 10–15 days. Rush orders (3–5 days) are available at a 20% surcharge. We quote exact lead time with your drawing.
Q: Can you provide material certificates? A: Yes. We supply EN 10204 3.1 material certs for aluminum, stainless, and titanium. Mill test reports are included free with every batch. For aerospace grades, we can also provide heat treat and conductivity reports.
Get a firm quote in 12 hours. No vague estimates. We read your print, check the geometry, and send you a fixed price per piece with lead time.
Email your drawing to sc@bquq.com WhatsApp: +86 13713157787
Precision manufacturing, made in China, no MOQ. Your brackets, machined right.
| Parameter | Capability |
|---|---|
| Materials | AL6061/7075, SUS303/304/316, 45# steel, T2 copper, H59 brass, POM, PEEK, nylon |
| Tolerance | ±0.005mm standard, ±0.003mm on request |
| Machines | 3/4/5-axis CNC, turn-mill, Swiss lathe |
| Surface | Anodizing, nickel, zinc, passivation, sandblast, polish |
| Size Range | Max 400 x 300 x 200 mm |
| Prototype | 72 hours, no MOQ on samples |
| Inspection | Full report per batch, CMM data on request |
