Custom Springs Made to Print | Precision Manufacturing, No MOQ | BQUQ
OpeningYour drawing is the only spec we need. We machine, stamp, and wind custom springs to your exact dimensions, load, and finish. Every batch is verified before shipment.We are BQUQ, a precision ma
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing is the only spec we need. We machine, stamp, and wind custom springs to your exact dimensions, load, and finish. Every batch is verified before shipment.
We are BQUQ, a precision manufacturing factory in Dongguan, China. 20 years in business. CNC machining, metal stamping, springs, and heat sinks under one roof.
Tolerance: ±0.01 mm on wire diameter, ±0.05 mm on free length
Lead time: 7–12 days for standard custom springs
No MOQ – order 1 piece or 100,000 pieces
Material certs and inspection report included with every batch
CNC coiling, automatic spring winding, manual tooling for prototypes
Batch size
1 – 1,000,000 pcs
Inspection
100% dimensional check on critical springs, load testing per batch
Certifications
ISO 9001:2015, material test reports, RoHS/REACH on request
Three reasons buyers send us their drawings
1. Batch-traceable quality.
Each batch gets a unique lot number. We record material heat number, machine settings, and operator ID. If a problem appears in your assembly line, we trace it back to the exact coil and wire. No guesswork.
2. Inspection report per batch.
You get a PDF with measured dimensions, load curves, surface condition, and material certs. We test free length, outer diameter, and spring rate on a digital force tester. Every report is signed by our QC lead.
3. One factory for CNC + stamping + spring + heatsink.
Your spring might sit next to a stamped bracket, a CNC-machined shaft, or a heat sink. We make all of them in-house. You deal with one engineer, one shipping address, one invoice. Less coordination, fewer errors, faster turnaround.
Where these parts are used
Custom springs are not commodity parts. They carry loads, absorb shock, and control motion in demanding environments.
Automotive: valve springs, clutch springs, suspension coils, brake return springs
Medical devices: precision compression springs in syringes, surgical instruments, implantable delivery systems
Electronics: contact springs in connectors, battery terminals, switch mechanisms
Q1: Is there really no MOQ?
Yes. We accept orders from 1 piece. Prototypes and small batches use the same machines and materials as production runs. The only difference is unit price – smaller batches cost more per piece because of setup time.
Q2: What tolerance can you hold, and how do you verify it?
Standard tolerance is ±0.05 mm on free length and ±0.01 mm on wire diameter. For critical springs, we hold ±0.02 mm on free length. We verify with digital calipers, micrometers, and a spring force tester. The inspection report shows actual measured values, not just pass/fail.
Q3: What is your typical lead time?
Prototypes: 5–7 days. Production: 7–12 days depending on quantity and surface finish. Urgent orders can be expedited to 3 days for simple compression springs. We ship worldwide via DHL, FedEx, or sea freight.
Q4: Can you provide material certificates?
Yes. Every batch includes a material test report from the mill. We also provide RoHS, REACH, and ISO 9001:2015 documentation on request. If you need a specific material grade, we source it and verify the heat number.
Send your drawing
Stop guessing if a factory can hold your tolerance. Send us your drawing, and we will confirm within 12 hours.
Firm quote with unit price and tooling cost (if any)
Lead time confirmation
Engineering feedback on manufacturability
Free DFM suggestions to reduce cost
Email: sc@bquq.com
WhatsApp: +86 13713157787
Precision manufacturing, made in China. No MOQ. Your drawing, our machines, verified quality.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.