Custom Double Torsion Springs Made in China | No MOQ Precision Coils
OpeningWe make double torsion springs exactly to your drawing. Not an approximation. Not a "close enough" version. Your DWG or PDF defines the wire diameter, coil count, leg angles, and free
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
We make double torsion springs exactly to your drawing. Not an approximation. Not a "close enough" version. Your DWG or PDF defines the wire diameter, coil count, leg angles, and free position. We hold it.
Every spring is verified before shipment. We check coil diameter, leg position, and load at specified deflection. If it does not match your print, it does not ship.
At a glance: Tolerance ±0.05 mm on coil OD, ±1° on leg angles, lead time 7–12 working days, no MOQ, material certs included.
Specifications
Parameter
Value
Wire diameter
0.1 mm – 12 mm
Max coil OD
80 mm
Max number of coils
50 per section
Materials
Spring steel (EN 10270-1), stainless 302/316, phosphor bronze, beryllium copper, Inconel X-750
Coil OD ±0.05 mm, free length ±0.3 mm, leg angle ±1°
Surface finish
As-coiled, zinc plated, nickel plated, passivated, or powder coated
Batch size
1 piece to 500,000 pieces
Inspection
100% dimensional check on first article, AQL 2.5 on production lots
Documentation
Material cert (EN 10204 3.1), dimensional report, load test report
We use CNC coilers, not manual winders. This gives repeatable pitch and consistent leg geometry across the whole batch. For critical applications, we add shot peening to improve fatigue life by up to 30%.
Three reasons buyers send us their drawings
1. Batch-traceable quality. Each production lot gets a unique heat number and job number. If you need to trace a spring back to its wire batch, we can do it in minutes. We keep records for 10 years.
2. Inspection report per batch. You get a dimensional report with actual measured values, not just a pass/fail stamp. We measure coil OD, free length, leg angles, and load at two specified deflections. The report is signed by our QC engineer.
3. One factory for CNC + stamping + spring + heatsink. Your assembly might need a stamped bracket, a CNC-machined housing, a compression spring, and an aluminum heatsink. We make all four under one roof. You save on shipping, you save on supplier management, and you get one responsible party for the whole assembly.
Where these parts are used
Double torsion springs store energy and return a mechanism to its starting position. They are common in:
Automotive – seat belt retractors, throttle return mechanisms, clutch pedals
Medical devices – surgical staplers, retractable needles, orthopedic braces
Aerospace – actuator return springs, latch mechanisms in cabin interiors
Industrial equipment – safety valves, conveyor belt tensioners, door closers
Because we control the wire material and heat treatment, we can tune the spring rate to your exact application. Need a spring that holds 5 N at 30° deflection? We calculate the wire diameter and coil count, then verify it on a load tester.
Q: What is your MOQ?
A: No MOQ. We make one prototype or one million pieces. Prototype pricing is slightly higher per piece, but the tooling is free. We do not charge setup fees for standard wire diameters.
Q: How do you guarantee tolerance and quality?
A: We use CNC coilers with closed-loop wire feed control. First article is measured on a CMM and a torsion load tester. Production lots are sampled per AQL 2.5. If a dimension drifts, we stop the line and adjust. You receive the inspection report with your shipment.
Q: What is your lead time for custom springs?
A: Prototypes: 5–7 working days. Production: 7–12 working days after drawing approval. For urgent orders, we can rush a prototype in 48 hours for a 20% surcharge.
Q: Can you provide material certificates?
A: Yes. Every batch comes with an EN 10204 3.1 material certificate. We also provide hardness test reports and fatigue test data if requested. For aerospace or medical, we can supply full traceability documentation.
Send your drawing
Email your DWG, DXF, PDF, or even a hand sketch with dimensions. Our engineers will review it and send you a firm quote within 12 hours. The quote includes unit price, tooling cost (if any), lead time, and a suggested material if your drawing does not specify one.
We are a precision manufacturing factory in Dongguan, China, with 20 years of spring-making experience. You talk to an engineer, not a salesperson.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Send your drawing today. We will confirm we can make it, or we will tell you honestly if we cannot.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.