Custom Helical Spring Antenna Coils | Precision Manufacturing Made in China
OpeningYour antenna design deserves a spring that matches your RF specs exactly. We make helical spring antenna coils from your drawing, not from a catalog. Every coil is verified for wire diameter, f
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your antenna design deserves a spring that matches your RF specs exactly. We make helical spring antenna coils from your drawing, not from a catalog. Every coil is verified for wire diameter, free length, and coil count before shipment.
At a glance: Wire diameter tolerance ±0.01 mm, free length tolerance ±0.05 mm, lead time 5–7 working days for prototypes, no MOQ. All custom springs are made in China at our Dongguan factory, with 20 years of precision manufacturing experience.
Specifications
Parameter
Value
Materials
Stainless steel 302/304/316, beryllium copper, phosphor bronze, spring steel, music wire
Wire diameter
0.05 mm – 8.0 mm
Coil diameter (OD)
0.5 mm – 80 mm
Free length
1 mm – 200 mm
Coil count
2 – 500 turns
Tolerance (wire dia)
±0.01 mm for wire under 1.0 mm
Tolerance (free length)
±0.05 mm for lengths under 20 mm
Pitch tolerance
±0.03 mm
Surface finish
Nickel plating, silver plating, gold plating, passivation, or as-drawn
Optical measuring projector, digital calipers, load tester, salt spray tester
Three reasons buyers send us their drawings
1. Batch-traceable quality. Each lot gets a unique batch number. We record raw material heat numbers, machine settings, and operator IDs. If a problem appears in your assembly line, we trace it back to the exact coil and the exact hour it was made. No guesswork.
2. Inspection report per batch. You receive a dimensional report with every shipment. It lists wire diameter, OD, free length, coil count, and load at specified deflection. We measure 5 pieces from each batch and keep records for 3 years. Our QC team signs off before anything leaves the floor.
3. One factory for CNC + stamping + spring + heatsink. Your antenna assembly might need a stamped contact, a CNC-machined housing, and a spring coil. We make all four in one building. You get one purchase order, one quality system, one shipping point. Fewer suppliers means fewer tolerance mismatches and faster problem solving.
Where these parts are used
Helical spring antenna coils are not just for radios. We ship custom springs to these applications:
IoT modules and trackers – small coils for 868 MHz and 915 MHz bands, often with gold plating for low contact resistance.
Medical telemetry devices – implantable or wearable antennas where biocompatible stainless steel and tight tolerances are mandatory.
Automotive key fobs and TPMS sensors – coils that survive vibration and temperature swings from -40°C to +125°C.
RFID tags and readers – helical coils tuned for 13.56 MHz or UHF frequencies, requiring consistent inductance.
Test and measurement probes – spring-loaded contacts that double as antenna elements in benchtop fixtures.
Military handheld radios – ruggedized coils with passivation for corrosion resistance in field conditions.
If your part is a wire wound into a helix and used for RF, we can make it. We also handle compression springs, torsion springs, and wire forms from the same drawing.
Q: Is there really no MOQ?
A: Yes, no MOQ. We make one prototype for your test bench or a million pieces for production. Prototype tooling is the same as production tooling, so your first article is your production part.
Q: How do you guarantee tolerance and quality?
A: We use CNC coiling machines with servo-controlled pitch. Each coil is measured on an optical projector. For critical dimensions, we use a 3D coordinate measuring machine. We send you the inspection report before shipment. If a dimension is out of spec, we rework or scrap it at our cost.
Q: What is the lead time?
A: Prototypes ship in 5–7 working days after drawing approval. Production runs of 10,000 pieces ship in 10–15 working days. For urgent needs, we can split the batch and air-ship the first 1,000 pieces.
Q: Can you provide material certificates?
A: Yes. We provide mill certificates for raw material, including chemical composition and mechanical properties. We also provide RoHS and REACH compliance documents on request. For medical or aerospace applications, we can supply full traceability documentation.
Send your drawing
Email your PDF or STEP file to sc@bquq.com. Include wire diameter, coil OD, free length, number of turns, and material if you know it. If you only have a sample, send it by courier and we will reverse-engineer it.
We reply with a firm quote in 12 hours. No vague estimates, no hidden tooling fees. You get a unit price, a tooling cost (if any), and a confirmed lead time.
For faster response, WhatsApp us at +86 13713157787. We are in Dongguan, China, and we answer within one business hour during working days (GMT+8).
Send your drawing today. Get a precision manufacturing quote that matches your RF requirements.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.