Custom Wire Form Springs Made in China | Precision Manufacturing No MOQ
OpeningWe bend wire into exact shapes. You send a drawing, we return a spring that fits your assembly on the first try. Every piece is verified before shipment, not sampled and assumed.This collection
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
We bend wire into exact shapes. You send a drawing, we return a spring that fits your assembly on the first try. Every piece is verified before shipment, not sampled and assumed.
This collection covers special shaped wire forms: torsion arms, clips, hooks, U-forms, zigzag springs, and multi-bend latches. If it’s not a standard compression or extension spring, this is the line for you.
Tolerance: ±0.05 mm on critical bends
Lead time: 7–12 days for prototypes, 15–20 days for production
No MOQ: order 1 piece or 100,000 pieces
Material: spring steel, stainless steel, music wire, phosphor bronze
Verification: 100% dimensional check on critical features, batch report included
CNC wire forming (2D/3D), 4-axis servo bending, coiling, stamping for flat features
Tolerance (standard)
±0.05 mm on bend positions, ±0.1 mm on free length
Tolerance (precision)
±0.02 mm on critical angles, verified with CMM
Surface finish
Zinc plated, nickel plated, electropolished, passivated, black oxide, or as-drawn
Heat treatment
Oil quenched and tempered, or stress relieved per material grade
Batch size
1 – 500,000 pcs, no setup charge for small batches
Inspection
Full dimensional report, material cert, hardness test, load test (if applicable)
Packaging
Anti-rust paper, plastic trays, or custom EVA inserts for fragile forms
Three Reasons Buyers Send Us Their Drawings
1. Batch-traceable quality. Each heat number and wire lot is recorded. If a part fails in your field, we trace it back to the exact coil and machine operator. You get a genealogy, not a shrug.
2. Inspection report per batch. You don’t have to ask. Every shipment includes a dimensional report with measured values against your drawing. Critical bends are checked on a CMM, not a protractor. For high-volume orders, we use SPC sampling per AQL 2.5, but we can tighten to AQL 1.0 on request.
3. One factory for CNC, stamping, springs, and heat sinks. Your wire form might need a stamped bracket welded on, or a CNC-machined end fitting. We do all four processes under one roof. That means one purchase order, one quality system, and no finger-pointing between suppliers. It also cuts your logistics cost by roughly 30% compared to using three separate vendors.
Where These Parts Are Used
Custom wire forms replace cast or machined parts when you need low mass, high fatigue life, or simple deflection.
Automotive interiors: seat recliner springs, glove box dampers, pedal return springs with complex hook ends.
Medical devices: surgical instrument return springs, catheter guidewire forms, orthodontic archwire bends (we hold ±0.02 mm there).
Consumer electronics: battery contact clips, SIM card ejector springs, hinge torsion springs for laptops.
Industrial equipment: safety latch springs for machine guards, conveyor belt tracking springs, vibration isolator forms.
Energy sector: solar panel mounting clips, battery pack compression springs for EV modules, connector springs for charging stations.
If your part bends, twists, or holds tension, we can form it from wire up to 12 mm thick.
Q: What is your MOQ?
A: No MOQ. We run prototypes from 1 piece. Production batches start at 100 pieces. Tooling is CNC-programmed, so there are no die costs to amortize.
Q: How do you control tolerance on complex bends?
A: We use servo-driven wire benders with closed-loop position feedback. After forming, critical dimensions are measured on a CMM. We provide a full report with your shipment. If a dimension is out of spec, we sort 100% before packing.
Q: What is your lead time for a custom shape?
A: Prototype (1–50 pcs): 7–12 days. Production (1,000+ pcs): 15–20 days. Urgent orders can be expedited to 5 days for prototypes at a 15% surcharge. We ship via DHL, FedEx, or air freight from our factory in Dongguan.
Q: Can you provide material certificates?
A: Yes. Every batch comes with a mill test certificate (MTC) for the wire material, plus our own hardness and tensile test results. For medical or automotive, we can provide PPAP Level 3 documentation on request.
Send Your Drawing
Stop guessing if a supplier can hit your tolerance. Send us your 2D drawing or 3D STEP file. We will review bend radii, springback, and material selection within 12 working hours.
You get a firm quote with unit price, tooling cost (usually zero), and a delivery date. No vague estimates.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Precision manufacturing, made in China, no MOQ. Your drawing is the only requirement.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.