Cnc Machined Dental Implant Parts from BQUQ are precision-machined titanium and stainless steel components — abutments, healing caps, transfer copes, and custom implant fixtures —
Cnc Machined Dental Implant Parts | BQUQ Precision Manufacturing China
Cnc Machined Dental Implant Parts from BQUQ are precision-machined titanium and stainless steel components — abutments, healing caps, transfer copes, and custom implant fixtures — built to ±0.005 mm t
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Cnc Machined Dental Implant Parts from BQUQ are precision-machined titanium and stainless steel components — abutments, healing caps, transfer copes, and custom implant fixtures — built to ±0.005 mm tolerance and 0.005 mm runout. You get repeatable seating between the implant and abutment, with a hardness of 42 HRC for long-term osseointegration stability. Typical lead time is 7 days for prototypes, 15 days for production runs, all from our 20-year-old factory in Dongguan, China.
How We Control Runout on the Implant-Abutment Interface
Runout on the internal hex or conical connection is what causes micro-leakage and screw loosening. We machine the mating surfaces in one clamping operation on 5-axis DMG MORI mills, eliminating re-chucking errors. Final runout is held to 0.005 mm — measured on a Zeiss CMM, not a gauge block. This ensures your abutment seats fully, with zero rocking, even after 100,000 insertion cycles.
Materials and Heat Treatment We Use for Implant Bodies
We stock Grade 5 Ti-6Al-4V ELI (ASTM F136) and Grade 23 titanium for implant bodies, plus 17-4 PH stainless steel for surgical instruments. Titanium parts are passivated and cleaned to ASTM F86 standards. For stainless components, we heat-treat to 42 HRC minimum, giving you edge retention on cutting instruments without brittleness. Raw material certificates are included with every lot.
Surface Finish That Reduces Bacterial Adhesion
Implant surfaces need roughness below 0.4 µm Ra on the abutment collar to prevent biofilm formation, but a rougher 1.5 µm Ra on the bone-contact area for osseointegration. We machine both conditions in one setup: polished collar at 0.2 µm Ra, blasted and acid-etched body at 1.5 µm Ra. Surface integrity is verified with a profilometer on 100% of parts before shipment.
Inspection Before Every Shipment: CMM and Hardness Reports
Every batch gets a full inspection report — not a sampling plan. We measure critical dimensions on a Zeiss Contura CMM with 0.0001 mm resolution, check runout on a Talyrond roundness tester, and test hardness on a Rockwell tester for all heat-treated parts. You receive the report as a PDF with your shipment, so you can skip incoming inspection on your side.
Lead Time and No MOQ for Dental Prototypes
We run a dedicated line for dental parts, so your prototype of 1 piece ships in 7 days. Production runs of 500 to 50,000 pieces ship in 15 days. There is no MOQ — we treat your first part as your production part, using the same fixtures and toolpaths. For urgent cases, 5-day express machining is available at a 15% surcharge.
Why BQUQ's 20-Year CNC History Matters for Medical Parts
We have machined dental parts since 2004, with over 4 million implant components delivered to CE and FDA-registered brands. Our 32 CNC machines include 8 5-axis mills, all calibrated weekly. This is precision manufacturing made in China, but with Swiss-level traceability: every part is laser-marked with a DMC code linking to its machining program, tool wear data, and inspector ID.
Ti-6Al-4V ELI (ASTM F136), Grade 23 Ti, 17-4 PH SS
Diameter range
2.0 mm to 12.0 mm
Length range
4.0 mm to 30.0 mm
Hardness
42 HRC (SS), 36 HRC (Ti annealed)
Machining tolerance
±0.005 mm
Runout (conical interface)
0.005 mm max
Surface finish (polished collar)
0.2 µm Ra
Surface finish (bone-contact area)
1.5 µm Ra
Lead time (prototype)
7 days
Lead time (production)
15 days
MOQ
No MOQ (1 piece accepted)
Cleaning
ASTM F86 passivation, ultrasonic wash
What is your minimum order quantity for Cnc Machined Dental Implant Parts?
No MOQ — we machine a single prototype at the same quality and lead time as a 50,000-piece order, using identical fixtures and inspection protocols.
Can you machine custom implant geometries from my CAD file?
Yes, send us STEP or IGES files; our engineers will review for manufacturability and suggest minor changes to improve runout or reduce cost, with a DFM report within 24 hours.
How do you ensure traceability for FDA or CE audits?
Each part carries a laser-marked DMC code linked to its material lot, machining program, tool wear data, CMM results, and inspector ID, stored for 10 years.
What is the typical lead time for a production run of 10,000 parts?
15 days from drawing approval to shipment, including full inspection reports and cleaning certificates.
Send your drawing today for a firm quote within 12 hours — we will confirm price, lead time, and tolerance feasibility on your exact part geometry. Email sc@bquq.com or WhatsApp +86 13713157787. Cnc Machined Dental Implant Parts with no MOQ, made in China, backed by 20 years of precision manufacturing.
