Precision CNC Machined Titanium Fasteners for Aerospace | BQUQ
OpeningYour drawing defines the part. We define the process.We machine titanium fasteners to your exact geometry—threads, head styles, undercuts, and chamfers—from raw bar stock or billet. Every batch
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing defines the part. We define the process.
We machine titanium fasteners to your exact geometry—threads, head styles, undercuts, and chamfers—from raw bar stock or billet. Every batch is inspected before shipment, and you receive a dimensional report with each order.
Tolerance: ±0.005 mm on critical diameters
Surface finish: Ra 0.4 µm achievable
Lead time: 7–12 working days for standard quantities
Batch size: 1 to 10,000 pieces
No MOQ—send one prototype or a full production run
We are a precision manufacturing factory in Dongguan, China, with 20 years of CNC machining experience. We do not resell. We machine, inspect, and ship directly from our floor.
CMM, optical comparator, thread gauges, ultrasonic testing on request
Batch size
1 to 10,000 pieces
Lead time
7 working days for prototypes, 12 for production runs
Certifications
Material certs (EN 10204 3.1), heat treat certs, RoHS/REACH
Three reasons buyers send us their drawings
1. Batch-traceable quality
Each lot gets a unique job number. We track material heat number, tooling, and operator on every part. If a problem appears in the field, we trace it back to the exact bar stock and shift. No guesswork.
2. Inspection report per batch
You do not have to trust us. We send a full dimensional report—critical features, thread pitch, surface finish—with every shipment. For aerospace fasteners, we also include material certs and, on request, first-article inspection (FAI) per AS9102.
3. One factory for CNC + stamping + springs + heat sinks
Your fastener may need a stamped washer, a spring retainer, or a heat sink for an electronic enclosure. We do all four processes under one roof. That means one purchase order, one quality system, one shipping point. Fewer suppliers, less risk, faster delivery.
Where these parts are used
Titanium fasteners from our CNC line go into:
Aircraft engine nacelles and mounting brackets
Satellite structural frames and antenna mounts
UAV airframes and actuator linkages
Helicopter rotor head assemblies
Missile guidance housings
Landing gear door actuators
Cryogenic valve stems for rocket propulsion
Medical implant instrumentation (Grade 23 ELI)
In each case, the fastener must hold a precise preload, resist galvanic corrosion, and survive vibration. Our machining process controls thread form and surface integrity to meet those demands.
Q: Do you really have no MOQ?
A: Yes. We machine one piece for a prototype or 10,000 for production. The unit price is higher for small batches, but the setup is the same. Many aerospace buyers start with 5–10 pieces for fit testing, then scale up.
Q: What tolerance and quality can I expect?
A: We hold ±0.005 mm on turned diameters and ±0.01 mm on thread pitch. Surface finish down to Ra 0.4 µm. Every batch is inspected with CMM and thread gauges. You get a dimensional report with each shipment.
Q: What is your lead time for titanium fasteners?
A: Prototypes (1–20 pieces) ship in 7 working days. Production runs (100–10,000 pieces) ship in 12 working days. Rush orders are possible at an additional cost—we can quote 5-day delivery for small batches.
Q: Do you provide material certificates?
A: Yes. Every titanium lot comes with an EN 10204 3.1 material certificate, traceable to the mill. We also provide heat treatment certs and, on request, FAI reports per AS9102.
Send your drawing
Send us your PDF or STEP file. We will review the geometry, suggest any manufacturability improvements, and return a firm quote within 12 hours.
Email: sc@bquq.com
WhatsApp: +86 13713157787
No MOQ. No minimum order quantity. Just precision manufacturing, made in China, verified before shipment. Send your drawing today.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.