Custom CNC Machined Oil Gas Valve Parts | Precision Manufacturing China
Your valve design. Our machines. Zero guesswork. We machine oil and gas valve parts exactly to your drawing. Every dimension is verified before shipment. You get parts that fit, seal, a
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your valve design. Our machines. Zero guesswork. We machine oil and gas valve parts exactly to your drawing. Every dimension is verified before shipment. You get parts that fit, seal, and perform on the first try.
Tolerance: ±0.005 mm on critical features
Lead time: 10–15 working days for standard batches
No MOQ: 1 piece or 10,000 pieces, same attention
Inspection: Full dimensional report with every batch
We are a precision manufacturing factory in Dongguan, China. 20 years in CNC machining, metal stamping, springs, and heat sinks. Your drawing is our instruction manual.
Material certificates (EN 10204 3.1), heat treatment reports, dimensional inspection reports
We hold tight tolerances on valve seats, stems, and bodies. Our 5-axis machines handle complex port geometries in one setup. That means fewer errors and better concentricity.
T
hree Reasons Buyers Send Us Their Drawings 1. Batch-traceable quality Every part gets a unique batch number. We track material heat, machine operator, and inspection results from raw bar to finished piece. If you need to trace a part back to its melt, we have the paperwork.
2. Inspection report per batch You do not have to trust us. We send a full dimensional report with every shipment. Critical dimensions are measured on a CMM. Threads are checked with go/no-go gauges. Surface finish is verified with a profilometer. You see the data before you see the parts.
3. One factory for CNC + stamping + springs + heat sinks Your valve assembly might need a machined body, a stamped diaphragm plate, a spring, and a heat sink for the actuator. We make all of them under one roof. One purchase order. One quality system. No coordination headaches between suppliers.
W
here These Parts Are Used Our CNC machined valve parts go into equipment that works under pressure, temperature, and vibration.
Wellhead control valves: Stems and seats machined from 17-4PH stainless steel. They handle sour gas and high-pressure differentials.
Pipeline gate valves: Bodies and bonnets with NPT threads. We machine sealing surfaces to API standards.
Pressure relief valves: Trim parts with tight clearances. We hold concentricity within 0.01 mm so the valve reseats properly.
Subsea actuator components: 5-axis machined housings from Inconel. They resist seawater corrosion and extreme hydrostatic pressure.
Flow control chokes: Needle and seat assemblies with fine-pitch threads. Surface finish Ra 0.4 µm prevents erosion from abrasive fluids.
Hydraulic fracturing manifolds: High-pressure fittings and adapters from A105 carbon steel. We zinc-plate them for corrosion resistance on the pad.
These parts fail if they are wrong. That is why buyers choose custom CNC machining from a factory that verifies everything.
Q
uestions Buyers Ask Before Ordering Q: What is your MOQ? A: No MOQ. We machine one prototype or a full production run. Prototypes ship in 7–10 days. Production batches start after you approve the sample.
Q: How do you guarantee tolerance and quality? A: We use in-process probing on the CNC machines. After machining, we inspect on a CMM and document every critical dimension. You receive a PDF inspection report with the shipment. If a dimension is out of spec, we rework or replace it at no cost.
Q: What is your lead time for a typical order? A: Standard lead time is 10–15 working days after drawing approval and material confirmation. For urgent orders, we can expedite to 5–7 days with a small surcharge. We quote exact lead time with your price.
Q: Can you provide material certificates? A: Yes. We supply EN 10204 3.1 material certificates for all metals. For special alloys like Inconel or Monel, we also provide heat treatment and hardness test reports.
S
end Your Drawing Stop waiting for quotes that take a week. Send us your drawing today.
Firm quote in 12 hours
DFM feedback on machinability and cost reduction
No MOQ, no hidden fees
Email your PDF or STEP file to sc@bquq.com WhatsApp: +86 13713157787
We are a precision manufacturing factory made in China, but we work to international standards. Your valve parts will be machined right, inspected thoroughly, and shipped on time. Send the drawing. We will handle the rest.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.