Precision CNC Collet Chuck Square Bore | Custom CNC Tooling Made in China
OpeningYour drawing defines the part. Our job is to hold that tolerance and prove it before the crate leaves Dongguan.We machine ER collet chucks and square bore collets to your exact geometry. Every
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing defines the part. Our job is to hold that tolerance and prove it before the crate leaves Dongguan.
We machine ER collet chucks and square bore collets to your exact geometry. Every unit is verified against your print. We do not ship guesswork.
At a glance: Concentricity within 0.005 mm TIR. Surface finish down to Ra 0.4. Lead time 15–20 working days after drawing approval. No MOQ. One prototype or 5,000 pieces, same process discipline.
Full material heat number and process log per batch
Lead time
15–20 working days for standard sizes; 25 days for complex geometries
MOQ
No MOQ. Single piece accepted
Country of origin
Made in China, Dongguan factory
Three Reasons Buyers Send Us Their Drawings
1. Batch-traceable quality, not just a QC stamp.
Every batch gets a unique number. That number links to material certs, machine operator logs, and CMM reports. If a problem appears in your assembly line six months later, we can pull the exact batch record and tell you which tool wore down and when. You cannot get this from a trading company.
2. Inspection report per batch, included free.
We do not ask you to trust us. Each shipment includes a dimensional report with measured values for every critical feature. You check our numbers against your gauge. If anything is out of spec, we remake it at our cost. No arguments, no delay.
3. One factory for CNC, stamping, springs, and heat sinks.
Your collet chuck might need a spring collet, a stamped retainer plate, or a heat sink for a high-speed spindle. We make all of those in the same building. You send one drawing package, deal with one engineering team, and receive one consolidated shipment. Fewer vendors, fewer handoff errors, lower logistics cost.
Where These Parts Are Used
CNC lathes and turning centers – Square bore collets grip square or hex stock for milling, drilling, and threading operations without round bar deformation.
Swiss-type screw machines – High-precision collet chucks maintain concentricity during long production runs of medical screws, watch pins, and electronic connectors.
Automotive powertrain lines – Custom ER collet chucks hold valve stems and fuel injector bodies during grinding and hard turning.
Aerospace fastener manufacturing – Heat-treated collets with square bores hold titanium and Inconel blanks where tool deflection is not an option.
Tool presetters and grinding fixtures – Collet chucks with square bores locate cutting tool shanks for re-sharpening, holding the same datum every cycle.
Q: What is your MOQ?
A: No MOQ. We machine one prototype for your validation, then scale to your volume. Prototype price is higher per piece, but the tooling and process remain identical for production runs.
Q: How do you guarantee tolerance on a square bore?
A: We cut the square bore with wire EDM, then finish with a precision broach or internal grinder. CMM inspection measures width, corner radius, and concentricity on every part in the batch. We send you the report before shipment.
Q: What is your standard lead time?
A: 15–20 working days for material in stock. If you need 48-hour expedite for a broken tool replacement, we can do that for standard ER collet sizes. Tell us your emergency upfront.
Q: Can you provide material certificates and heat treatment reports?
A: Yes. Every batch ships with mill certificates for raw material, heat treatment curves, and hardness test results. All documents are in English and stamped by our QA manager.
Send Your Drawing
Stop guessing which supplier can hold your tolerance. Send us your PDF or STEP file. We reply with a firm quote in 12 hours, including price, lead time, and a manufacturing feasibility note.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Precision manufacturing is not a promise. It is a measured result. We show you the numbers.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.