Stamped Floor Register Panels | Custom Air Vent Covers, Walkable Steel
Floor register panels stamped from cold rolled steel and aluminium - walkable, heavy duty, deburred, with adjustable air supply lever options. Tolerances held to 0.01 mm, 100% inspected, dimensional report with every batch. Send your drawing, quote in 12 hours.
Stamped floor register panels
A floor register panel has two jobs: move air, and take a footstep. We stamp them from cold rolled steel, galvanised steel or aluminium sheet in a progressive die, so the louvres, the outer flange and the mounting holes come out of one continuous pass.
After stamping the panel is deburred, the damper slot is checked with a gauge, and every batch is measured against your drawing: hole position, louvre pitch and flange width held to plus or minus 0.01 mm. Walkable panels get a heavier gauge and a hemmed edge so the flange does not flex under load.
Typical specification
| Material | Cold rolled steel, galvanised steel, aluminium 5052 |
| Thickness | 0.8 to 2.0 mm, heavier gauge for walkable panels |
| Panel size | standard 4x10, 6x10, 6x12 inch openings or custom up to 400 x 600 mm |
| Tolerance | plus or minus 0.01 mm on hole position and flange width |
| Finish | mill, powder coated to your RAL, or anodised |
| Inspection | 100 percent dimensional check, report with every batch |
FAQ
Can the panel carry a person standing on it?
Yes. For walkable grade we stamp 1.2 to 2.0 mm steel with a hemmed flange and a louvre pattern designed to bridge the opening. On a sample we can run a load check and send you the result.
Can you add an adjustable air supply lever?
Yes. The damper slot and the lever pivot are cut in the same die, so adding the lever option costs no extra tooling.
What sizes can you make?
Standard register openings 4x10, 4x12, 6x10 and 6x12 inch, plus any custom size inside 400 x 600 mm. The die is built to your drawing.
How do you keep the louvres flat?
The die clamps the strip on both sides of every louvre and a following station flattens the frame. Finished panels are checked on a granite plate, not on the press.
Related Products
- Precision Stamped Connector Pins & Sockets | Custom Metal Stamping China
- Custom Stamped Fan Guards & Wire Mesh Covers | BQUQ Precision Manufacturing
- Precision Stamped Connector Shells | Custom Metal Stamping No MOQ
- Precision Stamped Metal Grommets, Eyelets & Ferrules | Custom Made in China
- Precision Stamped Contact Springs | Custom Metal Stamping Made in China
Talk to an engineer
CNC machining · metal stamping · custom springs · heat sinks — ISO9001 source factory in Dongguan, China. ±0.005mm process control, quote within 12 hours.
Email sc@bquq.com | WhatsApp +86 13713157787 | www.bquq.com


