## Opening
Your drawing is the starting point. We turn it into a stamped fan guard or wire mesh cover that fits, protects, and lasts. Every part is made to your exact print, then verified before shi
Your drawing is the starting point. We turn it into a stamped fan guard or wire mesh cover that fits, protects, and lasts. Every part is made to your exact print, then verified before shipment. No guesswork. No surprises.
We are a precision manufacturing factory in Dongguan, China, with 20 years in metal stamping. You send the drawing. We handle the rest.
| Parameter | Value | Notes |
|---|---|---|
| Material thickness | 0.3 mm – 3.0 mm | Thinner or thicker on request |
| Materials | SPCC, SECC, SUS304, SUS316, Al 5052, C2680 brass | Full material certs available |
| Tolerance | ±0.05 mm (stamped), ±0.10 mm (formed) | Measured on CMM |
| Max part size | 600 mm x 600 mm | Larger sizes require custom tooling |
| Mesh opening | 3 mm – 25 mm | Round, square, or hexagonal |
| Wire diameter | 0.5 mm – 2.0 mm | For wire mesh inserts |
| Surface finish | Zinc, Ni, powder coat, anodize, passivate | Salt spray test up to 72 hours |
| Tooling | Progressive die, compound die, single-station | Tool life: 500,000+ strokes |
| Batch size | 1 – 1,000,000 pcs | No MOQ, flexible scheduling |
| Lead time | Prototype 3–5 days, production 10–15 days | After drawing approval |
| Inspection | First article, in-process, final | Report per batch included |
We run 25 stamping presses from 25 to 250 tons. Progressive dies handle high volume. Compound dies for tighter tolerances. Wire mesh covers are formed, then spot welded to the frame. All parts are deburred and cleaned before surface treatment.
2. Inspection report per batch. You get a dimensional report with every shipment. Key features are measured on a CMM and compared to your drawing. Surface finish and coating thickness are verified. The report is signed by our QC lead. You do not need to re-inspect everything on arrival.
3. One factory for CNC + stamping + springs + heat sinks. Your fan guard might need a stamped frame, a CNC-machined mounting boss, a spring clip, and a heat sink. Instead of juggling four suppliers, we do it all under one roof. Fewer handoffs, shorter lead times, one responsible party. This is custom metal stamping done right.
Stamped fan guards and wire mesh covers are everywhere. We ship to these industries daily:
Each application has different airflow, safety, and durability demands. We adjust mesh opening, wire gauge, and frame stiffness to your spec. If you are unsure, send us your drawing and operating conditions. We will recommend the right configuration.
Q: How do you control tolerance and quality? A: First article inspection on every new tool. In-process checks every 2 hours during production. Final inspection on 100% of critical dimensions and AQL sampling for the rest. You get a CMM report per batch. If a part is out of spec, we replace it at no cost.
Q: What is the lead time for stamped fan guards? A: Prototypes in 3–5 days after drawing approval. Production tooling in 10–15 days. For repeat orders without tooling changes, we ship in 7 days. We quote exact dates with your order confirmation.
Q: Do you provide material certificates? A: Yes. Mill test certificates for raw material, coating thickness reports, and RoHS/REACH compliance documents. All included with the batch inspection report. This is standard for our made in China precision manufacturing service.
Stop sourcing from multiple vendors. Get a firm quote in 12 hours. Send your drawing, material spec, and quantity. We will reply with pricing, tooling cost (if any), and a confirmed lead time.
Email: sc@bquq.com WhatsApp: +86 13713157787
We are ready to stamp your next part.
Looking for a different part? We also machine Precision Stamped Shims & Spacers | Custom Metal Stamping No MOQ in the same Dongguan factory.
| Parameter | Capability |
|---|---|
| Materials | SPCC, SGCC, SUS301/304/316, brass, copper, beryllium copper, phosphor bronze |
| Process | Progressive die stamping, fine blanking, deep drawing, bending, tapping |
| Tolerance | ±0.01mm standard, ±0.005mm on request |
| Surface | Zinc plating, nickel, tin, gold, powder coating, passivation, anodizing |
| Die Size | Up to 1200 x 800 mm, 16-250 ton presses |
| Thickness | 0.05 - 6.0 mm sheet metal, wire 0.1 - 8.0 mm |
| Prototype | 7-15 days tooling, no MOQ on samples |
| Inspection | Full report per batch, CMM and optical measurement |
