Custom Bonded Fin Aluminum Heatsinks | Precision CNC Machining Made in China
OpeningYour drawing defines the part. Our job is to hit the numbers on it. We machine bonded fin aluminum heatsinks to your exact print, then verify every critical dimension before the crate leaves ou
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing defines the part. Our job is to hit the numbers on it. We machine bonded fin aluminum heatsinks to your exact print, then verify every critical dimension before the crate leaves our floor. No surprises at incoming inspection.
At a glance: Bonded fin assembly tolerance ±0.05 mm. Standard lead time 15 working days. No MOQ. Prototype to production in one facility.
Specifications
Parameter
Value
Base Material
Aluminum 6063-T5, 6061-T6, or 1050 per drawing
Fin Material
Aluminum 1100 or 6063, thickness 0.5–3.0 mm
Fin Pitch
2.5 mm minimum, up to 15 mm
Fin Height
Up to 200 mm, bonded or epoxy-free mechanical lock
Base Thickness
3.0–50.0 mm
Bonding Method
Epoxy structural adhesive (thermal grade) or mechanical stake
Machining Tolerance
±0.05 mm on critical mounting surfaces
Flatness
0.05 mm over 100 mm length
Surface Finish
Clear anodize, black anodize, or as machined (Ra 1.6 µm)
CNC Capability
3-axis and 4-axis vertical machining centers
Max Part Size
800 mm x 600 mm x 300 mm
Batch Size
1 piece to 100,000 pieces per year
Inspection
CMM report, surface roughness check, dimensional report per batch
Lead Time
15 working days for prototypes, 20–25 for production runs
We use 6063-T5 for most extrusions because it balances thermal conductivity and machinability. If your design needs higher strength, we switch to 6061-T6. Fin bonding is done with thermal-grade epoxy rated for continuous operation up to 150°C. For higher temperatures, we use mechanical stake bonding with no adhesive.
Three Reasons Buyers Send Us Their Drawings
1. Batch-traceable quality. Every heatsink gets a unique batch number. We record material lot, machine operator, tooling used, and inspection results for that batch. If you find an issue six months later, we can trace it back to the exact pour and shift. This is standard, not a premium service.
2. Inspection report per batch. You get a dimensional report with actual measured values, not just a pass/fail stamp. We measure critical features like mounting hole positions, fin spacing, and base flatness on every batch. CMM data is included for complex geometries. You can file this report with your own QA without re-measuring everything.
3. One factory for CNC, stamping, springs, and heatsinks. Your assembly might need a stamped bracket, a compression spring, and a machined heatsink. We make all of them under one roof. That means one purchase order, one shipping date, and one quality system. No coordinating three suppliers across time zones.
Where These Parts Are Used
Bonded fin aluminum heatsinks handle high heat flux in constrained spaces. You will find them in:
Power electronics: IGBT modules, thyristor stacks, and rectifier bridges in industrial drives and UPS systems. Bonded fins give 30–50% more surface area than extruded profiles of the same footprint.
Telecom base stations: RF power amplifiers and remote radio heads where airflow is limited and ambient temperatures reach 55°C. The fin density helps shed heat in sealed enclosures.
Electric vehicle charging: DC fast chargers and onboard chargers that cycle between full load and idle. Bonded construction resists thermal fatigue better than brazed joints.
Laser equipment: Diode laser mounts and cooling blocks where flatness and parallelism directly affect optical alignment.
Medical imaging: X-ray generators and MRI gradient amplifiers that need quiet, passive cooling without moving parts.
If your application runs hot and the space is tight, bonded fins are usually the answer.
Q: Is there really no MOQ?
A: Correct. We make one prototype or one million pieces. The unit price for a single piece is higher because setup and programming dominate the cost. Once you move to production quantities, pricing drops significantly. We quote per drawing, so send yours for an exact number.
Q: How do you guarantee tolerance and quality?
A: We inspect every batch with calibrated equipment. Critical dimensions are measured on a CMM. Surface finish is checked with a profilometer. We send you the inspection report with the shipment. If a part is out of tolerance, we replace it at no cost. Our defect rate over the last five years is below 0.3%.
Q: What is the lead time for custom heat sinks?
A: Prototypes take 15 working days from drawing approval. Production runs take 20–25 working days depending on quantity and surface treatment. Anodizing adds 3–5 days. We can expedite prototypes to 7 working days for an additional fee.
Q: Can you provide material certificates?
A: Yes. Every aluminum lot comes with a mill certificate showing chemical composition and mechanical properties. We also provide RoHS and REACH declarations on request. For aerospace or medical applications, we can supply full traceability documentation.
Send Your Drawing
Email your PDF or STEP file to sc@bquq.com. Include your target quantity, required surface treatment, and any critical tolerances. We will reply with a firm quote within 12 hours. For urgent inquiries, message us on WhatsApp at +86 13713157787.
Precision manufacturing is our baseline. Custom heat sinks made in China with no MOQ and full traceability. Send the drawing. Get the quote.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.