Custom Copper Skived Fin Heatsinks | Precision Manufacturing, No MOQ
OpeningWe machine copper skived fin heatsinks to your exact drawing. No redesigns. No guesswork. Every unit is verified before shipment.This collection covers fin heights from 10 mm to 80 mm, base
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
We machine copper skived fin heatsinks to your exact drawing.
No redesigns. No guesswork.
Every unit is verified before shipment.
This collection covers fin heights from 10 mm to 80 mm, base thickness from 2 mm to 15 mm, and overall lengths up to 600 mm.
Typical flatness tolerance is 0.05 mm over 100 mm.
Lead time is 10–15 working days for prototypes, 20–25 days for production runs.
No MOQ. One piece or ten thousand, same process control.
Material: C1100 or C1020 copper
Fin thickness: 0.4–2.0 mm
Fin pitch: 1.5–6.0 mm
Tolerance: ±0.05 mm on critical dimensions
Surface finish: 0.8 µm Ra as machined
Lead time: 10–25 days
MOQ: none
Specifications
Parameter
Value
Notes
Material
C1100, C1020, C1220
Oxygen-free copper available on request
Fin height
10–80 mm
Skived from solid block
Fin thickness
0.4–2.0 mm
Uniform across fin stack
Fin pitch
1.5–6.0 mm
Measured at fin tip
Base thickness
2–15 mm
Optional embedded heat pipe slots
Overall length
50–600 mm
Single-piece skiving
Tolerance (critical)
±0.05 mm
On base flatness, fin height, hole positions
Flatness
0.05 mm / 100 mm
Verified on granite plate
Surface roughness
0.8 µm Ra
As machined, no secondary polish
Surface treatment
Anti-tarnish dip, nickel plating, or bare
Per your spec
Process
CNC skiving, CNC milling, deburring
All in-house
Inspection
CMM, optical comparator, flatness gauge
100% on critical dimensions
Batch size
1–10,000 pcs
No MOQ, batch traceability
Lead time
10–15 days (prototype), 20–25 days (production)
From drawing approval
All skiving is done on a dedicated 3-axis CNC machine with a custom carbide tool.
We control tool wear by measuring fin thickness every 50 pieces.
Deburring is manual, then verified under magnification.
You get a dimensional report per batch, not just a box of parts.
Three reasons buyers send us their drawings
1. Batch-traceable quality.
Every heatsink gets a unique batch number.
We store material certificates, tool settings, and inspection data for each batch for 3 years.
If a field failure happens, you can trace it back to the exact copper lot and machine run.
That is not common for custom heat sinks made in China, but we do it as standard.
Material mill certificate
Dimensional measurements (key features, 5 samples per batch)
Flatness and roughness readings
Photos of the actual parts
The report is signed by the QC lead.
If any dimension is out of tolerance, we reject the batch before it ships.
You do not have to re-inspect everything on arrival.
3. One factory for CNC, stamping, springs, and heatsinks.
BQUQ runs four production lines under one roof.
Your heatsink might need a stamped clip, a CNC-machined base, or a spring for mounting.
We make all of them in-house.
No third-party coordination, no shipping delays between suppliers.
One purchase order, one quality standard, one responsible engineer.
Where these parts are used
IGBT modules in inverters and motor drives
Laser diode mounts and optical transceivers
High-power LED arrays in stadium lighting
CPU and GPU coolers for servers
Medical imaging equipment (CT, MRI power supplies)
RF power amplifiers in telecom base stations
Skived fins give you a solid base with no thermal interface between fins and base.
That means lower thermal resistance than stamped or bonded fin stacks.
For a 100 mm x 100 mm base with 20 mm fins, you can expect thermal resistance around 0.25 °C/W at 2 m/s airflow.
If you need a specific simulation, send us your boundary conditions.
Q: What is your MOQ?
A: None. We accept one-piece prototypes and scale to 10,000 pieces.
The unit price is higher for small batches, but the process and inspection are identical.
Q: How do you control tolerance and quality?
A: We use CMM and optical comparators for critical dimensions.
Flatness is checked on a granite plate with a dial indicator.
Each batch gets a dimensional report.
If you need first-article inspection (FAI) per AS9102 or PPAP, we can do that too.
Q: What is the lead time for custom heat sinks?
A: Prototypes (1–10 pcs) ship in 10–15 working days after drawing approval.
Production runs (100+ pcs) take 20–25 working days.
For urgent orders, we can split the batch and air-ship the first 20 pieces.
Q: Can you provide material certificates?
A: Yes. We supply mill certificates for all copper grades.
C1020 is oxygen-free copper with 101% IACS conductivity.
C1100 is electrolytic tough pitch copper, 100% IACS.
We also provide RoHS and REACH declarations if required.
Send your drawing
Email your 2D or 3D file to sc@bquq.com.
We reply with a firm quote within 12 hours.
Include your target quantity, surface finish, and any thermal requirements.
If you are not sure about fin geometry, we will suggest a design based on your heat load and airflow.
Precision manufacturing for custom heat sinks is our core business.
Made in China, but with traceable quality and no MOQ.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.