Custom Heat Pipe Heatsink Cooler | Precision Manufacturing Made in China
OpeningYour drawing. Our machines. A heatsink that fits your enclosure, your airflow, and your thermal budget.We machine, stamp, and assemble custom heat sinks to your exact print. Every unit is check
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing. Our machines. A heatsink that fits your enclosure, your airflow, and your thermal budget.
We machine, stamp, and assemble custom heat sinks to your exact print. Every unit is checked before shipment—dimensions, fin spacing, heat pipe placement, and surface finish. No surprises on your line.
Tolerance: ±0.05 mm on CNC-machined features
Lead time: 7–12 days for prototypes, 15–20 days for production runs
No MOQ: order 1 piece or 10,000 pieces
Material certs: 6061-T6, 6063-T5, C1100 copper, or your spec
1. Batch-traceable quality
Each batch gets a unique job number. We record material lot, machine operator, and inspection results. If a problem shows up at your incoming QC, we trace it to the exact pour and shift. You get a full traceability sheet with every shipment.
2. Inspection report per batch
We don't just say "it's good." You receive a dimensional report, material cert, and surface finish measurement for each batch. For heat sinks, we also test thermal resistance on a sample unit—not a simulation, a real measurement with a thermocouple and heater block.
3. One factory for CNC + stamping + spring + heatsink
Your heatsink might need a stamped clip, a spring-loaded fastener, or a CNC-machined base plate. Most suppliers send those out to three different shops. We don't. All four lines are under one roof in Dongguan. That means one purchase order, one quality system, and one shipping date. No coordination headaches.
Where these parts are used
Our heat pipe heatsinks go into electronics that generate serious heat in a small space.
LED lighting: High-bay fixtures, automotive headlamps, and grow lights. Heat pipes spread heat from the COB to the fin array, keeping junction temperature below 85°C.
Power electronics: IGBT modules, rectifiers, and motor drives. Base plates are CNC-machined to match the module footprint, with heat pipes pulling heat to a remote fin stack.
Telecom equipment: Base stations, small cells, and edge servers. We make low-profile heatsinks with heat pipes that fit in 1U or 2U enclosures.
Medical devices: Laser equipment, ultrasound machines, and diagnostic scanners. Quiet operation matters, so we optimize fin spacing for natural convection.
Consumer electronics: Gaming consoles, audio amplifiers, and mini PCs. We produce high-volume stamped fin assemblies with heat pipes, anodized black for aesthetics and emissivity.
Q: What is your MOQ?
A: No MOQ. We make one prototype for your thermal test, or 10,000 units for production. Tooling costs are quoted separately and amortized over your order quantity.
Q: How do you control tolerance and quality?
A: CNC-machined features hold ±0.05 mm. We inspect 100% of critical dimensions on the first article, then use SPC sampling during production. Every batch ships with a dimensional report and material cert.
Q: What is your lead time?
A: Prototypes in 7–12 days after drawing approval. Production runs in 15–20 days. For repeat orders with no design change, we can hold safety stock and ship in 5 days.
Q: Do you provide material certificates?
A: Yes. We provide mill certificates for aluminum and copper, plus RoHS and REACH declarations. If you need specific certifications (e.g., UL for plastic parts), tell us—we'll source and document accordingly.
Send your drawing
Upload your PDF, STEP, or IGES file. We'll review the geometry, heat pipe layout, and tolerances. You get a firm quote in 12 hours—price, lead time, and tooling cost if applicable.
No MOQ, no minimum order quantity, no runaround. Just precision manufacturing from a factory that's been doing this for 20 years.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Send your drawing today. We'll tell you exactly what it costs to make it right.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.