Custom Round Radial Aluminum Heatsinks | Precision Manufacturing Made in China
OpeningSend us your drawing. We machine your round radial aluminum heatsink to print, verify every critical dimension, and ship only after inspection.Tolerance: ±0.05 mm on fin pitch and heightLead ti
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Send us your drawing. We machine your round radial aluminum heatsink to print, verify every critical dimension, and ship only after inspection.
Tolerance: ±0.05 mm on fin pitch and height
Lead time: 7–12 days for prototypes, 15–20 days for production runs
No MOQ — order 1 piece or 10,000 pieces
Surface finish: black anodize (standard), clear anodize, or as specified
We are a precision manufacturing factory in Dongguan, China, with 20 years in CNC machining, metal stamping, springs, and heat sinks. One shop, one quality standard.
Specifications
Parameter
Value
Material
Aluminum 6063-T5, 6061-T6, or 5052 (per your spec)
Process
CNC turning, CNC milling, or die casting + CNC finishing
Diameter range
20 mm to 300 mm
Fin height
5 mm to 80 mm
Fin thickness
1.0 mm to 5.0 mm (as drawn)
Tolerance
±0.05 mm on critical features; ±0.1 mm general
Surface finish
Black anodize (MIL-A-8625 Type II), clear anodize, bead blast, or as drawn
Flatness
≤0.1 mm on mounting surface
Batch size
1 to 50,000+ pieces
Inspection
100% critical dimension check per batch; CMM report on request
We use CNC lathes with live tooling for complex radial fin geometries. For high-volume parts, we combine die casting with CNC finishing to cut cost without losing accuracy. Every batch is traceable to material lot and machine operator.
Three Reasons Buyers Send Us Their Drawings
1. Batch-traceable quality
Each order gets a unique batch number. We record material heat number, machine used, and inspector ID. If a problem appears in your assembly line, we trace it back in minutes — not days.
2. Inspection report per batch
You get a dimensional report with every shipment. It lists fin height, fin pitch, mounting surface flatness, and surface finish. No surprises. No "we checked it, trust us." You see the numbers.
3. One factory for CNC + stamping + springs + heatsinks
Your heatsink might need a stamped clip, a compression spring, or a CNC-machined base plate. We do all four in-house. You deal with one supplier, one invoice, one quality system. Fewer vendor audits, faster lead times, lower logistics cost.
Where These Parts Are Used
Round radial aluminum heatsinks are built for confined spaces where airflow is axial or natural convection. Common applications:
LED lighting modules — street lights, high-bay fixtures, and automotive headlamps. Radial fins maximize surface area in a round housing.
Power electronics — IGBT modules, rectifiers, and motor drives. The round profile fits inside cylindrical enclosures.
Telecom equipment — RF amplifiers and base station power supplies. Anodized surface provides electrical insulation and corrosion resistance.
Medical devices — laser diodes and imaging systems where clean, finned surfaces meet thermal and hygiene requirements.
Audio amplifiers — class A/B and class D amplifiers with round chassis. Radial fins look clean and dissipate heat evenly.
If your application needs a custom hole pattern, threaded inserts, or a specific mounting boss, we machine it in the same setup. No extra handling, no tolerance stack-up.
Q: What is your MOQ?
A: No MOQ. We make one prototype for your test, then scale to your volume. Tooling cost is quoted separately only for die-cast parts; CNC-machined parts have zero tooling charge.
Q: How do you control tolerance and quality?
A: We use CNC machines with ±0.01 mm repeatability. For every batch, we measure fin pitch, height, and mounting flatness with a CMM. The inspection report is included in the shipment. If a dimension is out of spec, we rework or remake at no cost.
Q: What is your lead time?
A: Prototypes in 7–12 days after drawing approval. Production runs in 15–20 days, depending on quantity and surface finish. For urgent orders, we can split the batch and ship partials.
Q: Can you provide material certificates?
A: Yes. We supply mill certificates for aluminum 6063-T5 or 6061-T6 with every production order. Certificates show chemical composition and mechanical properties. For anodized parts, we include a thickness test report.
Send Your Drawing
Email your PDF or STEP file to sc@bquq.com. We reply with a firm quote in 12 hours — price, lead time, and inspection plan. For urgent questions, WhatsApp +86 13713157787.
We are a precision manufacturing partner in Dongguan, China. Custom heat sinks made in China, built to your drawing, verified before shipment. No MOQ, no hidden costs. Send your drawing today.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.