Custom Stamped Aluminum Heat Sinks | Precision Manufacturing No MOQ
OpeningYour drawing. Our machines. Verified before shipment.We are BQUQ, a precision manufacturing factory in Dongguan, China. We have run CNC machining, metal stamping, spring, and heat sink lines fo
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing. Our machines. Verified before shipment.
We are BQUQ, a precision manufacturing factory in Dongguan, China. We have run CNC machining, metal stamping, spring, and heat sink lines for 20 years. This page is about stamped aluminum heat sinks and cooling fin collections.
We do not sell off-the-shelf parts. We make your design. You send the 2D or 3D file. We build it, measure it, and ship it with proof.
At a glance: Stamping tolerance ±0.05 mm. Lead time 7–15 days for standard batches. No MOQ. Material certs included. 100% dimension check before packing.
Specifications
Parameter
Value
Notes
Material
Al 1050, 1060, 5052, 6061, 6063
Temper O, H14, H24, T6 as required
Process
Progressive die stamping, CNC trimming, deburring
Single die to high-volume run
Thickness range
0.3 mm – 6.0 mm
Tighter on request
Tolerance
±0.05 mm (stamping), ±0.02 mm (CNC)
Per ISO 2768-mK or your spec
Fin height
Up to 80 mm
Aspect ratio limited by material
Surface finish
Clear anodize, black anodize, chromate, powder coat
Mil-spec anodize available
Max part size
600 mm x 400 mm
Larger via CNC line
Batch size
1 pc to 1,000,000 pcs
No MOQ, no setup fee for prototypes
Lead time
7 days (prototype), 15 days (production)
Sample before mass run
Inspection
CMM, optical comparator, salt spray test
Report per batch, AQL 2.5
Certifications
ISO 9001:2015, material mill certs, RoHS/REACH
Sent with every shipment
Three reasons buyers send us their drawings
1. Batch-traceable quality. Every heat sink gets a unique lot number. We record the material heat number, die number, and operator. If a problem appears in your field, we trace it to the exact shift and coil. No guesswork.
2. Inspection report per batch. You get a hard copy and PDF. It lists dimensions, surface finish, flatness, and material hardness. We use a CMM for critical holes and an optical comparator for fin profile. We do not skip checks. If a batch fails, you know before it ships.
3. One factory for CNC, stamping, springs, and heat sinks. Your assembly may need a stamped base, a CNC-machined mounting block, and a compression spring for a clip. We make all three under one roof. Fewer suppliers, fewer handoffs, fewer excuses. You get one invoice, one quality standard, one shipping date.
Where these parts are used
Our stamped aluminum heat sinks go into real products that run hot and run long.
LED lighting modules. Street lights, high-bay fixtures, automotive headlamps. Fins are stamped thin and tight for maximum surface area in a small envelope.
Power electronics. IGBT modules, MOSFET heatsinks, rectifier bridges. We hold flatness under 0.1 mm so thermal paste works evenly.
Telecom enclosures. Base stations and 5G remote radio units. Our heat sinks handle natural convection in sealed boxes.
Motor controllers and inverters. EV auxiliary drives, servo drives, solar inverters. Stamped fins keep weight down and airflow up.
Medical devices. Laser equipment and imaging systems where clean anodize and no burrs are mandatory.
Industrial power supplies. Enclosed units where the heat sink doubles as the chassis wall.
If your part moves air or conducts heat, we can stamp it.
Q: What is your MOQ?
A: No MOQ. We make one prototype for your test. Production pricing starts at 100 pieces. For high-volume runs, we build a dedicated progressive die to lower your unit cost.
Q: How do you guarantee tolerance and quality?
A: We quote your drawing, not a guess. First article is measured and sent to you for approval. Production batches are checked at the start, middle, and end of the run. Critical dimensions go on a CMM. You receive the inspection report with the shipment.
Q: What is your lead time for custom heat sinks?
A: Prototype: 7 days after drawing approval. Production: 15 days for standard batches. For urgent orders, we can split the die and run two shifts. Air freight is on you, but we pack so nothing bends.
Q: Do you provide material certificates?
A: Yes. Every coil of aluminum comes with a mill certificate. We also provide RoHS and REACH declarations. If you need a specific alloy or temper, we buy it to your spec and show you the paper.
Send your drawing
Stop guessing. Send us your heat sink drawing and get a firm quote in 12 hours.
We are a precision manufacturing factory in Dongguan, China. Custom heat sinks are our core line. Made in China does not mean low quality—it means fast, flexible, and honest. No MOQ, no hidden tooling fees, no surprise delays.
Email your STEP, IGES, or PDF to sc@bquq.com. Or message us on WhatsApp at +86 13713157787.
We will reply with a price, lead time, and a straight answer on whether your design is stampable. If it is not, we will tell you how to change it. That is free advice, no strings attached.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.