Custom Stamped Zigzag Heatsink | Precision Manufacturing No MOQ
## Opening Your drawing becomes a finished stamped zigzag heatsink in 15 days. We cut, form, and inspect every part to your print—not to a catalog standard. Before shipment, each batch gets a dimens
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing becomes a finished stamped zigzag heatsink in 15 days. We cut, form, and inspect every part to your print—not to a catalog standard. Before shipment, each batch gets a dimensional report and a surface finish check. If it doesn’t match your tolerance, it doesn’t leave Dongguan.
At a glance: ±0.05 mm stamping tolerance, 15-day lead time, no MOQ, batch-traceable from coil to carton.
Specifications
We run stamped zigzag heatsinks on 25-ton to 160-ton high-speed presses. Material is aluminum 1050, 1060, 5052, or 6061—your call. For higher thermal conductivity, we use 1050 or 1060. For structural rigidity, 5052 or 6061. Fin thickness ranges from 0.3 mm to 2.0 mm. Fin height goes up to 60 mm.
Parameter
Value
Material
Aluminum 1050, 1060, 5052, 6061
Fin thickness
0.3 – 2.0 mm
Fin height
Up to 60 mm
Stamping tolerance
±0.05 mm
Flatness (base)
≤ 0.1 mm over 100 mm
Surface finish
Bare, clear anodize, black anodize, or chromate
Max part size
300 mm × 300 mm
Tooling
In-house, custom die from your 3D or 2D file
Lead time
7 days for samples, 15 days for production
MOQ
No MOQ—order 10 or 10,000 pieces
Inspection
CMM + optical comparator, report per batch
We also offer post-stamping options: deburring, tapping, riveting, or attaching a spring clip. All done in the same factory.
Three reasons buyers send us their drawings
1. Batch-traceable quality. Every coil of aluminum has a lot number. We record it against your order. If a material issue appears, we trace it back to the exact batch—not guess. Each part gets a unique batch code on the carton.
2. Inspection report per batch. You don’t take our word. After stamping, we measure critical dimensions on a CMM and check surface finish with a profilometer. You receive a PDF report with actual values, not just a pass/fail line. If you need first-article inspection (FAI) with PPAP documents, we do that too.
3. One factory for CNC + stamping + spring + heatsink. Your stamped heatsink might need a CNC-machined base, a spring clip, or a threaded insert. We do all four lines under one roof. No third-party handoffs, no miscommunication, no extra freight. You send one drawing set; we deliver a fully assembled part.
Where these parts are used
Stamped zigzag heatsinks are common in power electronics and LED lighting. You’ll find them in:
LED drivers and modules—zigzag fins increase surface area without adding height, ideal for slim fixtures.
Switching power supplies—MOSFETs and diodes mount directly to the base; the zigzag pattern dissipates heat in confined enclosures.
Motor controllers—electric scooters, e-bikes, and industrial drives use these for IGBT cooling.
Telecom equipment—base stations and routers with passive cooling requirements.
Automotive electronics—headlamp drivers, battery management systems, and DC-DC converters.
If your application needs natural convection cooling in a tight space, a stamped zigzag heatsink is often the cheapest, lightest option.
Questions buyers ask before ordering
Q: What is your MOQ?
A: No MOQ. We accept one prototype piece or a 10,000-piece production run. Tooling cost is quoted separately for new dies, but we keep it low—typically $300–$800 depending on complexity.
Q: How do you guarantee tolerance and quality?
A: We use hard tooling (not soft dies) for repeatability. Every batch is checked on a CMM. We provide a dimensional report and material certificate with each shipment. If a part is out of spec, we replace it at no cost.
Q: What is your lead time?
A: Samples in 7 days after tooling approval. Production in 15 days for standard sizes. For urgent orders, we can split shipments—send what’s ready first, then the rest.
Q: Can you provide material certificates?
A: Yes. We supply mill certificates for aluminum coils and any required RoHS or REACH declarations. For automotive or medical projects, we also provide full traceability documents.
Send your drawing
Email your 2D or 3D file to sc@bquq.com. Include material, finish, and quantity if you know them. We’ll reply with a firm quote in 12 hours—not a range. If you need a recommendation on fin thickness or alloy, tell us your power dissipation and airflow, and we’ll suggest a design.
Precision manufacturing, custom heat sinks, made in China—with 20 years of stamping experience behind every part.
WhatsApp: +86 13713157787
Email: sc@bquq.com
BQUQ Factory, Dongguan, China. No MOQ. No surprises.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.