Custom Decorative Craft Springs | Precision Manufacturing No MOQ China
OpeningYour drawing defines the part. We build it exactly to that geometry, then verify every critical dimension before the carton leaves our floor. No surprises at your incoming inspection.These are
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing defines the part. We build it exactly to that geometry, then verify every critical dimension before the carton leaves our floor. No surprises at your incoming inspection.
These are not off-the-shelf coils. They are decorative craft springs made to your print—wire diameter, pitch, coil count, and end finish all locked to your tolerance.
Tolerance: ±0.05 mm on OD/ID, ±0.1 mm on free length
Lead time: 7–12 days for prototypes, 15–20 days for production runs
No MOQ: order 10 pieces or 100,000 pieces
Material certs: mill test reports included with every batch
Inspection: 100% dimensional check on critical springs, batch report PDF sent with shipment
Specifications
Parameter
Value
Wire diameter
0.1 mm – 12 mm
Spring OD
Up to 150 mm
Free length
Up to 300 mm
Materials
Music wire (EN 10270-1), stainless 302/304/316, phosphor bronze, beryllium copper, 65Mn carbon steel
Zinc plated, nickel plated, powder coated, electropolishing, passivation, or as-drawn
End types
Closed & ground, closed not ground, plain ends, custom hooks/loops
Batch size
No MOQ—pilot runs from 10 pcs, production up to 500k pcs/month
Inspection
Load testing, fatigue testing, metallurgical analysis, salt spray test on plated parts
All springs are coiled on CNC machines with servo-controlled pitch. Heat treatment is done in atmosphere-controlled furnaces. We hold hardness within ±2 HRC on request.
Three reasons buyers send us their drawings
1. Batch-traceable quality
Every coil gets a heat number and a work order number. We can trace any spring back to the wire lot, the machine operator, and the heat treatment cycle. If you have a field failure, we tell you exactly what happened—not a guess.
2. Inspection report per batch
You get a PDF with measured values for OD, ID, free length, solid height, and load at specified deflection. We also include wire tensile strength and hardness data. Your QC team can file it without re-testing.
3. One factory for CNC + stamping + spring + heatsink
Your assembly might need a stamped bracket, a CNC-machined housing, and a heat sink—plus the spring. We run all four lines under one roof. That means one purchase order, one shipping date, and one responsible supplier. No coordination headaches across three vendors.
Where these parts are used
Decorative craft springs show up in more than toys. We ship them into:
Q: What is your MOQ?
A: No MOQ. We accept 10-piece prototype orders and scale to 500,000 pieces per month. Prototype tooling is free for standard wire diameters.
Q: How do you control tolerance and quality?
A: We use CNC coiling with closed-loop feedback. Every spring is checked on a digital caliper or optical comparator. Critical dimensions are 100% inspected; non-critical are sampled per AQL 1.0. We send the inspection report with your shipment.
Q: What is your lead time for custom springs?
A: Prototypes ship in 7–12 days after drawing approval. Production runs take 15–20 days, depending on surface treatment. Urgent orders can be expedited to 5 days with a small surcharge.
Q: Can you provide material certificates?
A: Yes. Every batch includes a mill test report showing chemical composition and mechanical properties. We also provide RoHS and REACH compliance documents on request.
Send your drawing
Email your PDF or STEP file. We reply with a firm quote in 12 hours—including price, lead time, and a DFM note if we see a better way to make it.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Precision manufacturing, made in China, no MOQ. Send the drawing, get the quote.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.