Custom Stainless Steel Compression Springs | Precision Manufacturing No MOQ
OpeningYour drawing defines the spring. We build exactly that.Every spring is made to your print—wire diameter, free length, total coils, load at deflection, and end type. We verify each dimension bef
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing defines the spring. We build exactly that.
Every spring is made to your print—wire diameter, free length, total coils, load at deflection, and end type. We verify each dimension before shipment. No guesswork.
Tolerance: ±0.05 mm on outer diameter and free length (per DIN 2095 grade 2)
Lead time: 7–12 working days for prototypes, 15–20 for production runs
No MOQ—order one piece or one million
Material certs: EN 10204 3.1 included with every batch
We are a precision manufacturing factory in Dongguan, China, with 20 years on CNC machining, metal stamping, springs, and heat sinks. One shop floor, one quality system, one invoice.
Specifications
Parameter
Value
Materials
SUS 302, 304, 316L, 17-7PH, Inconel X-750 (per your spec)
Wire diameter
0.1 mm – 12.0 mm
Outer diameter
1.0 mm – 120 mm
Free length
2 mm – 300 mm
End types
Closed & ground, closed & not ground, plain ends, pigtail
Coiling process
CNC coiling (0.1–5.0 mm wire), hot coiling (5.0–12.0 mm wire)
Tolerance
DIN 2095 grade 2 standard; grade 1 available on request
Surface finish
As-coiled, passivated, electropolished, shot-peened, zinc or nickel plated
All springs are stress-relieved after coiling. Shot peening is optional but recommended for cyclic loads above 10⁷ cycles. We set load at 20% of solid height per standard practice.
Three reasons buyers send us their drawings
1. Batch-traceable quality.
Each batch gets a unique number. That number links to material heat, coiling machine, operator, and inspection records. If a part fails in your assembly, we can trace it back to the exact wire lot in minutes. This is not typical for most spring shops in China.
2. Inspection report per batch.
You receive a dimensional report with every shipment. It lists OD, ID, free length, solid height, and load at specified deflection for sampled pieces. We also include material certs and hardness test results. No extra charge.
3. One factory for CNC + stamping + spring + heat sink.
Your assembly may need a stamped bracket, a CNC-machined housing, and a spring. We make all of them under one roof. You get one purchase order, one quality contact, and one shipping date. Fewer suppliers means fewer delays and less finger-pointing.
Where these parts are used
Custom stainless steel compression springs are not commodity parts. They go into demanding assemblies.
Medical devices: syringe pumps, surgical staplers, and drug delivery pens. SUS 316L for corrosion resistance and biocompatibility.
Automotive: valve springs, clutch release mechanisms, and fuel injector internals. 17-7PH for high fatigue life.
Industrial valves: pressure relief valves and check valves. Springs must hold set pressure over millions of cycles.
Electrical switchgear: contact pressure springs in circuit breakers. Silver-plated for low contact resistance.
Aerospace actuators: small-diameter springs in servo valves. Inconel for high temperature.
If your spring fails, your product stops. That is why we treat tolerance and material certs as non-negotiable.
Q: What is your MOQ?
A: No MOQ. We coil one prototype for you to test, then scale to 500,000 pieces. Tooling is CNC-based, so setup cost is the same for one or one thousand.
Q: How do you control tolerance and quality?
A: We follow DIN 2095 grade 2 as the default. For tighter needs, we use grade 1 with 100% inspection on critical dimensions. Load testing is done on a digital force tester calibrated annually. Every batch gets a report.
Q: What is the lead time for custom springs?
A: Prototypes ship in 7–12 working days after drawing approval. Production runs take 15–20 working days. For urgent orders, we can split delivery—ship what is ready first, then the balance.
Q: Can you provide material certificates?
A: Yes. EN 10204 3.1 mill certificates come with every batch, at no extra cost. We also provide heat treatment records and surface finish reports on request.
Send your drawing
Email your PDF or STEP file. We reply with a firm quote in 12 hours.
Include wire diameter, outer diameter, free length, number of active coils, end type, and required load at deflection. If you only have a sample part, send it by courier—we will reverse-engineer and quote.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Precision manufacturing, made in China, with no MOQ and full traceability. Your drawing is the contract. We build to it.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.