Precision Deep Drawn Metal Cups | Custom Stamping, No MOQ, Made in China
OpeningYour drawing. Our press. Verified dimensions before the crate leaves our floor.We make deep drawn metal cups from your CAD file or a napkin sketch. Round, rectangular, stepped, or flanged—if it
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing. Our press. Verified dimensions before the crate leaves our floor.
We make deep drawn metal cups from your CAD file or a napkin sketch. Round, rectangular, stepped, or flanged—if it can be formed, we quote it. Every batch is checked against your tolerance, not a generic standard. We send you the inspection report before shipment, so you approve what arrives.
At a glance: ±0.05 mm tolerance on critical diameters, 0.3 mm to 3.0 mm material thickness, 10 to 500 ton press capacity, 15-day standard lead time, no MOQ. Prototype in 7 days.
Prototype 7 days, production 15 – 25 days after tooling approval
Certifications
ISO 9001:2015, material mill certificates, RoHS/REACH reports
Three reasons buyers send us their drawings
1. Batch-traceable quality. Each lot gets a unique heat number and production log. If a problem shows up at your assembly line, we trace it to the exact coil, press, and operator shift. No guesswork.
2. Inspection report per batch. You get dimensional data, material hardness, and surface roughness readings—not a "passed" stamp. Our QC team measures first articles and every 50th piece during production. The report is emailed to you before shipment.
3. One factory for CNC, stamping, springs, and heat sinks. Your deep drawn cup might need a CNC-machined flange, a spring retainer, or a heat sink base. We do all four lines under one roof. You avoid coordinating three suppliers, three shipping dates, and three sets of tolerance arguments.
Where these parts are used
Deep drawn metal cups are structural shells, housings, and fluid barriers. Real applications we ship today:
The deep draw process work-hardens the material, so your cup gets higher yield strength than the raw sheet. That means thinner walls can replace thicker machined parts—lighter, cheaper, and faster to produce.
Q: Is there really no MOQ?
A: Yes, no MOQ. We run 1-piece prototypes for fit testing and 100-piece pilot runs. Production pricing kicks in at 1,000 pieces, but you are never forced to over-order.
Q: What tolerance can you hold on a deep drawn cup?
A: ±0.05 mm on formed diameters up to 100 mm. Depth tolerance is ±0.1 mm. If you need tighter, we add a sizing or ironing operation—tell us your critical dimensions on the drawing.
Q: How do you guarantee quality before shipment?
A: We run a full first-article inspection (FAI) with a CMM report. During production, we check dimensions every 50 pieces and record hardness and surface finish. The batch report is attached to your packing list and emailed to you.
Q: Do you provide material certificates?
A: Yes. Every coil and sheet comes with a mill certificate showing chemical composition and mechanical properties. We also provide RoHS and REACH declarations on request.
Send your drawing
Email your CAD file (STEP, IGES, or PDF) to sc@bquq.com or WhatsApp +86 13713157787. We reply with a firm quote in 12 hours—price, lead time, and tooling cost if applicable. No obligation, no sales pressure. Just precision manufacturing numbers you can take to your purchasing team.
Your drawing. Our press. Verified before shipment. That is how custom metal stamping should work.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.