Precision Stamped Washers and Shims | Custom Metal Stamping No MOQ
OpeningYour drawing defines the part. Our press defines the result. We produce precision stamped washers, shims, and flat parts exactly to your print—no interpretation, no shortcuts. Every batch i
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing defines the part. Our press defines the result.
We produce precision stamped washers, shims, and flat parts exactly to your print—no interpretation, no shortcuts.
Every batch is verified before shipment with a full inspection report.
20 years of precision manufacturing in Dongguan, China
Specifications
Parameter
Value
Material thickness
0.05 mm – 6.0 mm
Tolerance (critical)
±0.01 mm
Tolerance (general)
±0.05 mm
Surface finish
As-stamped, deburred, or plated (Zn, Ni, Sn, Au)
Press capacity
25 – 250 tons
Process
Progressive die, compound die, or four-slide
Batch size
1 – 1,000,000+
Inspection
CMM, optical comparator, micrometer, pin gauges
Certifications
Material certs, RoHS, REACH, IATF 16949 (on request)
Lead time
7 days (prototype), 15 days (production)
All parts are made in China at our own factory.
No outsourcing. No middlemen.
Three reasons buyers send us their drawings
1. Batch-traceable quality
Each lot gets a unique batch number.
We track material, press settings, and inspection results from coil to carton.
If a problem appears at your assembly line, we can trace it back to the exact minute it was stamped.
2. Inspection report per batch
You get a dimensional report with every shipment.
Critical features are measured and recorded.
No surprises. No "we checked it, trust us."
3. One factory for multiple processes
Need a stamped shim plus a CNC-machined housing and a custom spring?
We run all four lines—stamping, CNC machining, springs, and heat sinks—under one roof.
One purchase order. One quality system. One shipping date.
Where these parts are used
Precision stamped washers and shims are not commodity parts.
They are functional components in demanding assemblies.
Automotive: transmission shims, valve spring washers, brake caliper spacers
Q: What is your MOQ?
A: No MOQ. We stamp 1 piece for prototype validation or 1 million for production.
Your cost per piece scales with quantity, but your first order can be a single unit.
Q: How do you control tolerance and quality?
A: We use progressive dies with in-die sensors and post-press CMM inspection.
Critical dimensions are measured 100% or per AQL sampling, depending on your spec.
You receive the inspection report with the shipment.
Q: What is the lead time for stamped washers?
A: Prototype tooling: 5–7 days. Production: 10–15 days after tool approval.
For urgent orders, we can run existing tooling within 48 hours.
Q: Can you provide material certificates?
A: Yes. Every batch comes with a mill certificate for the raw material.
We also provide RoHS, REACH, and mechanical test reports on request.
Send your drawing
Stop sourcing from catalogs. Get parts made to your exact spec.
Email your 2D or 3D drawing to sc@bquq.com for a firm quote within 12 hours.
Prefer chat? WhatsApp +86 13713157787.
We reply with price, lead time, and a feasibility review—free, no obligation.
Your drawing. Our press. Verified quality.
Precision manufacturing, made in China, no MOQ.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.