Zinc Plated Stamped Spring Clips | Custom Metal Stamping Made in China
OpeningYou need a spring clip that holds tension, resists corrosion, and fits your assembly on the first try. We make it from your drawing, not from a catalog. Every batch is verified before shipment.
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
You need a spring clip that holds tension, resists corrosion, and fits your assembly on the first try. We make it from your drawing, not from a catalog. Every batch is verified before shipment.
We are BQUQ, a precision manufacturing factory in Dongguan, China. Our metal stamping line has run for 20 years. We do not guess tolerances. We measure them.
At a glance: +/- 0.05 mm stamping tolerance, 7-day lead time for prototypes, 15 days for production, no MOQ.
Specifications
We run high-speed presses from 25 to 250 tons. For zinc plated spring clips, we use cold-rolled steel strip (SPCC, SPCD, or 65Mn spring steel) and apply a bright or yellow zinc plating per ASTM B633. We can also add a clear trivalent chromate passivate if your spec requires RoHS compliance.
Parameter
Value
Material thickness
0.1 mm – 4.0 mm
Material grades
SPCC, SPCD, 65Mn, SUS301, SUS304
Stamping tolerance
+/- 0.05 mm (standard), +/- 0.02 mm (precision die)
Surface finish
Zinc plating (blue, yellow, black), passivation, or as-drawn
100% dimensional check on critical features, AQL 2.5 on full batch
Documentation
Material cert, plating cert, dimensional report per batch
Three reasons buyers send us their drawings
1. Batch-traceable quality. Every lot gets a unique batch number. We record the material heat number, press settings, die wear check, and plating bath data. If a part fails in your field, we trace it back to the exact shift that made it. You get a traceability sheet with every shipment.
2. Inspection report per batch. We do not say "it should be fine." We send you a dimensional report with CMM (coordinate measuring machine) data for critical features, a plating thickness test result, and a hardness check if you specified spring temper. You can verify our work before you put it on your line.
3. One factory for CNC + stamping + springs + heat sinks. Your spring clip is not an island. It sits next to a CNC-machined bracket, a compression spring, and a heat sink. We make all of them under one roof. That means one purchase order, one quality system, and no finger-pointing between suppliers when something does not fit. You talk to one engineer, not four.
Where these parts are used
Spring clips are the quiet workhorses of mechanical assemblies. We ship them to OEMs in automotive, electronics, and appliance industries.
Automotive: Retaining clips for brake calipers, fuel line brackets, and interior trim fasteners. Zinc plating protects against road salt and humidity.
Electronics: EMI shield clips, battery contact clips, and PCB mounting clips. Our 65Mn material gives consistent contact force over thousands of cycles.
Appliances: Tension clips for washing machine door seals, oven rack stops, and refrigerator hinge springs. These parts see heat and moisture, so we spec the right plating thickness.
Industrial equipment: Lock washers, retaining rings, and quick-release clips for pneumatic cylinders. Tolerance matters here—a loose clip means downtime.
If your application needs a custom shape, a specific spring rate, or a corrosion spec beyond standard zinc, send us the drawing. We will tell you if it is stampable and what it will cost.
Q: Do you really have no MOQ?
A: Yes. We run small batches for prototypes and low-volume production. Your first order can be 100 pieces. The unit price will be higher than a million-piece run, but you do not pay for tooling you do not need. We keep standard dies for common clip shapes.
Q: What tolerance and quality can I expect?
A: Standard stamping tolerance is +/- 0.05 mm. For critical spring clip features like bend angles and slot widths, we hold +/- 0.02 mm with a precision die. Every batch ships with an inspection report. We use AQL 2.5 sampling and 100% inspection on features that affect function.
Q: What is your lead time?
A: Prototype parts ship in 7 days after drawing approval. Production runs take 15 days. If you need faster, we can split the batch and air-freight the first portion. We have done 5-day turnarounds for emergency line-down situations.
Q: Do you provide material certificates and plating certs?
A: Yes. Every shipment includes a mill certificate for the steel strip and a plating thickness certificate. If you need a RoHS or REACH declaration, we provide it. For automotive buyers, we can supply PPAP Level 3 documentation on request.
Send your drawing
Stop reading. Send us your PDF or STEP file. We will reply with a firm quote in 12 hours—not a range, not a "maybe." You get the unit price, tooling cost (if any), and lead time.
Email: sc@bquq.com
WhatsApp: +86 13713157787
We are a precision manufacturing factory in Dongguan, China. Custom metal stamping is our core business. No MOQ, no surprises, no excuses. Just parts that fit.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.