Custom CNC Machined Bicycle Parts Aluminum | Precision Manufacturing
## Opening Your drawing is the blueprint. We machine it to spec, then verify every critical dimension before the parts leave our floor. No guesswork, no surprises.We are BQUQ, a precision manufactur
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your drawing is the blueprint. We machine it to spec, then verify every critical dimension before the parts leave our floor. No guesswork, no surprises.
We are BQUQ, a precision manufacturing factory in Dongguan, China, with 20 years in CNC machining, metal stamping, springs, and heat sinks. For bicycle parts, we cut aluminum from 6061-T6 or 7075-T6, hold tolerances to ±0.01 mm, and ship in 7–15 days.
Tolerance: ±0.01 mm (ISO 2768-fine)
Lead time: 7–15 days for prototypes, 15–25 days for production
No MOQ: order one piece or ten thousand
Inspection: full dimensional report with every batch
Specifications
We run a mix of 3-axis, 4-axis, and 5-axis CNC mills, plus CNC lathes for round parts. All machines are calibrated weekly. Raw material is sourced with mill certificates, and we keep stock for common aluminum grades.
For bicycle parts, we commonly machine: dropouts, derailleur hangers, brake mounts, stem clamps, seatpost collars, and crank arms. Wall thickness down to 1.5 mm is routine, but we confirm stiffness with FEA if you request it.
Three reasons buyers send us their drawings
1. Batch-traceable quality
Every part gets a unique batch number. We record raw material heat number, machine used, operator, and inspection results. If a problem shows up in the field, we trace it back to the exact batch and correct the process. No vague "we checked it."
2. Inspection report per batch
You get a full dimensional report with each shipment. Critical features are measured on a CMM, and we include the data sheet. For high-volume runs, we use SPC sampling—every 20th piece checked. You know exactly what you received, not what we hope we made.
3. One factory for CNC + stamping + springs + heat sinks
Your bicycle part might need a CNC-machined bracket, a stamped washer, a spring clip, and a heat sink for a motor controller. We make all four in-house. One purchase order, one quality system, one shipping point. You avoid juggling four suppliers and four sets of delays.
Where these parts are used
CNC machined aluminum bicycle parts go into performance and electric bikes, where strength-to-weight ratio and precision matter.
Derailleur hangers – must align perfectly with the cassette; ±0.01 mm keeps shifting crisp.
Brake caliper mounts – flatness and thread alignment prevent brake rub and pad wear.
Stem and handlebar clamps – fatigue resistance is critical; 7075-T6 with smooth surface finish avoids stress risers.
Motor mounts for e-bikes – need tight tolerances to align the motor axle with the frame dropouts.
Suspension linkage parts – drilled and reamed holes for pivot pins; bushing fit is everything.
Custom adapters – for converting frames, mounting racks, or fitting non-standard components.
We also machine prototypes for frame builders and small-series production for boutique bike brands. If it’s aluminum and it’s on a bike, we can cut it.
Questions buyers ask before ordering
Q: Do you really have no MOQ?
A: Yes. We run one-off prototypes for fit testing and full production runs. Setup cost is quoted separately for small batches, but the unit price drops as quantity increases. No minimum order, no forced inventory.
Q: How do you guarantee tolerance and quality?
A: We inspect 100% of critical dimensions on every part for batches under 500 pieces. For larger runs, we use SPC sampling with AQL 1.0. A CMM report is included with every shipment. If a part is out of spec, we replace it at no cost.
Q: What is your typical lead time?
A: Prototypes: 7–10 days after drawing approval. Production: 15–25 days, depending on quantity and surface treatment. Anodizing adds 3–5 days. We quote exact dates when you send the drawing.
Q: Can you provide material certificates?
A: Yes. Every batch comes with a mill certificate for the aluminum, plus RoHS and REACH compliance documents if needed. We also keep samples of raw material for 12 months after shipment.
Send your drawing
Email your PDF or STEP file to sc@bquq.com. We reply with a firm quote in 12 hours—price, lead time, and suggested improvements if we see a way to cut cost. Need a faster answer? WhatsApp us at +86 13713157787.
Custom CNC machining, made in China, with no MOQ and real inspection. Send the drawing, get the parts.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.