Custom CNC Machined Drone Parts Aluminum | Precision Manufacturing China
OpeningYour design. Our machines. Zero guesswork.We machine aluminum drone parts exactly to your drawing. Every dimension is verified before shipment. If it doesn't match your print, it doesn't leave
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
We machine aluminum drone parts exactly to your drawing. Every dimension is verified before shipment. If it doesn't match your print, it doesn't leave our floor.
Tolerance: ±0.005 mm (ISO 2768-fine or tighter on request)
Lead time: 5–7 working days for prototypes, 10–15 for production runs
We are a precision manufacturing factory in Dongguan, China, with 20 years of CNC machining experience. Your parts are made in China, but inspected with the same rigor you'd expect from a German or Japanese shop.
Material certs (EN 10204 3.1), dimensional inspection report per batch
Lead time
Prototype: 5–7 days, production: 10–15 days, expedited available
We run 24/7. That's how we keep lead times short without cutting corners.
Three reasons buyers send us their drawings
1. Batch-traceable quality
Every batch gets a unique job number. We track material lot, tool paths, and operator initials from start to finish. If a problem shows up later, we can trace it back to the exact heat of aluminum and the exact machine that cut it. You get full traceability, not just a box of parts.
2. Inspection report per batch
You don't have to trust us. You get a dimensional inspection report with every shipment. We use CMM for critical features, and we include the raw data. If you need a full PPAP or First Article Inspection, we do that too. No extra charge for standard reports.
3. One factory for CNC + stamping + springs + heat sinks
Most drone parts aren't just one process. You might need a CNC-machined frame, a stamped bracket, a spring for the landing gear, and a heat sink for the ESC. We do all four under one roof. That means one purchase order, one shipping point, one quality standard. Fewer suppliers, fewer delays, fewer headaches.
Where these parts are used
Our CNC machined aluminum drone parts go into real products that fly, carry, and measure.
Quadcopter and hexacopter frames: Motor mounts, arm plates, center plates, and gimbal brackets machined from 6061-T6 or 7075-T6 for stiffness and light weight.
FPV racing drones: Precision-machined camera mounts, antenna holders, and battery plates. Tight tolerances keep vibration low at 200+ km/h.
Industrial inspection drones: Payload mounts for LiDAR, thermal cameras, and gas sensors. We hold flatness within 0.02 mm so your sensors stay calibrated.
Agricultural spray drones: Corrosion-resistant 5052 aluminum parts for tank mounts and boom arms, anodized for harsh chemical exposure.
Delivery drones: Structural components that must survive repeated landings and temperature swings. We stress-relieve and inspect every critical bracket.
Custom UAV prototypes: R&D teams send us one-off parts for flight testing. We ship in days, not weeks, so you can iterate fast.
Q: What is your MOQ?
A: No MOQ. We make one prototype or 50,000 production parts. The unit price drops with quantity, but we never turn down a single-piece order.
Q: How do you guarantee tolerance and quality?
A: We machine to your drawing, not to "best effort." Standard tolerance is ±0.01 mm. We inspect 100% of critical dimensions on every part, and we send you the inspection report. If a part is out of spec, we remake it at our cost.
Q: What is your typical lead time?
A: Prototypes in 5–7 working days. Production runs in 10–15 working days, depending on quantity and surface finish. For urgent jobs, we can split shifts and deliver in 3 days. Ask us when you send your drawing.
Q: Can you provide material certificates?
A: Yes. We provide EN 10204 3.1 material certificates for aluminum, plus heat treatment reports if you specify it. We also provide RoHS and REACH compliance documents on request.
Send your drawing
Stop speculating. Send us your 2D or 3D drawing and get a firm quote in 12 hours.
We'll review your material, tolerance, and finish requirements. Then we'll send you a price and lead time that you can take to your team. No vague estimates. No hidden fees.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Your parts, machined right, shipped fast, made in China with precision you can verify.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.