Precision CNC Machined Gearbox Shafts | Custom Tolerance, No MOQ
OpeningYour gearbox lives or dies by its shafts. We machine them to your exact drawing—no redesigns, no substitutions. Every shaft is verified before shipment, not after. If the print says Ø12.000 mm,
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your gearbox lives or dies by its shafts. We machine them to your exact drawing—no redesigns, no substitutions. Every shaft is verified before shipment, not after. If the print says Ø12.000 mm, that is what you get.
We are BQUQ, a precision manufacturing factory in Dongguan, China. We have run CNC lines for 20 years. Your drawings go straight to the shop floor. No sales layers, no delays.
At a glance: ±0.005 mm machining tolerance, 7–10 day lead time, no MOQ, ISO 9001:2015, 100% inspection report per batch.
Specifications
Parameter
Value
Materials
4140, 4340, 8620, 1045, 17-4PH, 303/304/316 SS, 6061/7075 Al
Diameter range
3 mm – 80 mm
Length range
10 mm – 600 mm
Tolerance
±0.005 mm (ISO 2768-f available)
Surface finish
Ra 0.4 µm – Ra 1.6 µm
Heat treatment
Carburizing, induction hardening, through hardening (HRC 20–60)
Processes
CNC turning, CNC milling, cylindrical grinding, keyway broaching, thread rolling
1. Batch-traceable quality. Each batch gets a unique lot number. Material heat numbers, machine operator, inspection records—all linked to that number. If a problem appears in your assembly line, we trace it back in minutes, not weeks.
2. Inspection report per batch. You do not have to trust us. Every shipment includes a dimensional report. Critical features are measured on a CMM. Hardness and surface finish are documented. You can skip incoming inspection if your QA allows it.
3. One factory for CNC + stamping + springs + heat sinks. Your gearbox shaft might need a circlip, a spring retainer, or a heat sink for the motor housing. We make all of them under one roof. Fewer suppliers, fewer logistics headaches, one point of accountability.
Where these parts are used
Our shafts go into gearboxes that run 24/7. Typical applications:
Industrial gear reducers – input and output shafts for conveyors, mixers, and cranes. High torque, high cycle life.
Automotive transmission systems – countershafts, layshafts, and differential pinion shafts. We hold tight tolerances for bearing journals and spline fits.
Robotics and servo actuators – small-diameter shafts with high precision. Backlash and runout matter at these speeds.
Agricultural machinery – PTO shafts and gearbox shafts exposed to dirt and shock loads. We use 8620 with carburizing for surface hardness.
Medical devices – miniature gearbox shafts for surgical drills and infusion pumps. Clean materials, tight tolerances, full traceability.
If your application needs a shaft that carries load, transmits torque, or locates bearings—we have machined something like it before.
Q: Do you really have no MOQ?
A: Yes. We run one prototype shaft for a customer testing a new design. We also run 100,000 pieces for production lines. Our CNC machines are flexible. You pay for the parts, not for a minimum batch.
Q: How do you guarantee ±0.005 mm tolerance?
A: We machine to the drawing, then measure. Critical diameters and runouts are checked on a CMM with a resolution of 0.001 mm. The inspection report is included with every shipment. If a part is out of spec, it does not leave the factory.
Q: What is your typical lead time?
A: Prototypes ship in 7 days. Production batches in 10–14 days, depending on heat treatment and grinding steps. We quote a firm lead time with your price. We hit it—or we tell you before it slips.
Q: Can you provide material certificates?
A: Yes. We supply mill certificates for all raw materials. Heat treatment reports and hardness curves are available on request. All documents are in English.
Send your drawing
Stop sourcing gearbox shafts from three different suppliers. Send us your drawing and get a firm quote in 12 hours.
Email: sc@bquq.com
WhatsApp: +86 13713157787
We reply with a price, a lead time, and a clear statement of what we can hold. No vague promises. Precision manufacturing is what we do.
Your drawing. Our machines. Verified parts. Made in China, with no MOQ.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.