Precision CNC Machined Robot Arm Parts Aluminum | Custom Manufacturing
OpeningYour robot arm only performs as well as its weakest link. We machine the links that hold your tolerances.Send us your drawing. We cut aluminum to your exact specifications, verify every critica
Get a Fast Quote for This Part
Send us your drawing / quantity / material — reply within 24h.
Your robot arm only performs as well as its weakest link. We machine the links that hold your tolerances.
Send us your drawing. We cut aluminum to your exact specifications, verify every critical dimension, and ship only after inspection passes. No surprises. No guesswork.
Tolerance: ±0.005 mm on machined features
Prototype lead time: 72 hours from drawing approval
MOQ: none — order one piece or ten thousand
Specifications
We run a dedicated CNC shop for precision machining, not a job shop that fits you between other orders. Here is what your parts get:
Aluminum is our default for robot arms because it gives you the best stiffness-to-weight ratio. We also machine stainless steel, titanium, and brass if your design calls for it.
Three reasons buyers send us their drawings
1. Batch-traceable tolerance.
Every part carries a unique serial number. We record tool offsets, machine ID, and operator for each batch. If a dimension drifts, we know exactly when and where. You get a digital traceability file with your shipment.
2. Inspection report per batch.
We do not just say "it's within tolerance." You receive a CMM report listing every measured feature against your GD&T callouts. For critical robot joints, we include a 100% inspection of bore diameters and parallelism. If it fails, we re-machine it at no cost.
3. One factory for CNC + stamping + springs + heat sinks.
Your robot arm is not just machined parts. It has brackets, springs, and thermal management. We run all four lines under one roof. That means one purchase order, one quality system, one shipping date. No coordinating three suppliers and hoping they align.
Where these parts are used
Our customers build and repair industrial robots, collaborative arms, and automated inspection systems. Here are real applications from the last 12 months:
6-axis articulated arm links — 7075-T6 aluminum, 5-axis machined, black anodized. Used in a palletizing robot running 20 hours/day.
End-effector mounting plates — 6061-T6, ±0.01 mm flatness, tapped holes for pneumatic grippers.
Reducer housing adapters — precision machined to fit harmonic drive units, with dowel pin holes at ±0.005 mm.
Sensor brackets for vision-guided robots — lightweight, thin-wall design, bead blasted to reduce glare.
Custom wrist housings — 4-axis machined, internal coolant channels, hard anodized for wear resistance.
These parts go into automotive assembly lines, electronics pick-and-place machines, and medical device handling systems. If your robot moves, we can machine the metal that makes it move accurately.
Q: What is your minimum order quantity?
A: No MOQ. We prototype one piece and scale to production runs. Many customers start with a single validation part, then order 500 or 5,000 after testing.
Q: Can you hold ±0.005 mm on a 300 mm long arm?
A: Yes, but we need to see the full drawing. Long parts require stress-relieved material and careful fixturing. We will flag any tolerance that is not achievable in aluminum and suggest a redesign if needed.
Q: How fast can I get parts?
A: Prototypes in 72 hours after drawing approval. Production batches of 100–1,000 pieces typically ship in 10–15 working days. Rush service available for critical downtime repairs.
Q: Do you provide material certificates?
A: Yes, every shipment includes mill certificates for the aluminum batch. We also provide heat treatment reports if you specify T6 or T651 condition.
Send your drawing
Stop reading. Send your PDF or STEP file.
We will review your geometry, confirm machinability, and send a firm quote within 12 hours. You get honest feedback on tolerances, surface finish, and cost reduction opportunities — no obligation.
Email: sc@bquq.com
WhatsApp: +86 13713157787
Precision machining, custom parts, CNC machining China — we do it daily. Your drawing is the next step.
Straight answers from the factory, not a sales brochure.
How do I get a quote for this part?
Send your drawing (STEP, IGES, DWG, DXF or PDF) with quantity and target material to sc@bquq.com or WhatsApp +86 137 1315 7787. Our engineers review the drawing and reply with price, lead time and tooling cost.
What is your MOQ?
We do not set a fixed MOQ. The minimum is decided per part and per process, so tell us your target quantity and we quote against it. Small trial batches are accepted for new parts.
What is the lead time?
Lead time is agreed per order, based on the date you need, the quantity, the material and whether tooling is required. Send your target date with the drawing and we confirm what is achievable before you commit.
What tolerance can you hold?
CNC machining holds ±0.005 mm. Stamping, spring and extrusion parts are made to the tolerances marked on your drawing, and we confirm achievable values at quotation so there are no surprises at inspection.
Can you manufacture parts to my drawing?
Yes. Every order is made to the customer drawing or sample. We run CNC machining, metal stamping, spring coiling and aluminium heat sink extrusion in-house in Dongguan, so one supplier covers the whole part.
STEP, IGES, DWG, DXF and PDF. A 2D drawing with tolerances and surface finish requirements is preferred alongside the 3D model. Hand sketches can be quoted after our engineers redraw them.
How is quality controlled?
Inspection runs through the process, not only at the end: first article approval, in-process checks and a final report per batch, measured with CMM and optical equipment. Material certificates are available on request.
Where is the factory and do you ship worldwide?
Our factory is in Dongguan, Guangdong, China, operating since 2005. We ship worldwide by express, air and sea, and work with the forwarder nominated by the buyer.